CNC 5-axis Offline Controller 500KHZ Motion Controller 7 Inch Large Screen Replace Mach3 USB for Engraving Milling Machine

CNC 5axis Stand Alone Motion Controller Offline CNC Controller SMC5-5-N-N 500KHz 7 Inch Large Screen Replace Mach3 USB Motion Controller

CNC 5-axis Offline Controller 500KHZ Motion Controller 7 Inch Large Screen Replace Mach3 USB for Engraving Milling Machine

CNC 5 Axis 500KHz Stand Alone Motion Controller Offline Support RTCP Replace Mach3 USB Controller 7 inch Screen

Features:

1. Parameter Setting: Various control parameters related to processing and operation can be set to achieve the best processing results.

2. Manual Operation: can be achieved manually, jog back to the program zero, back to mechanical zero, cleared coordinate operations etc.

3. Program Management: program can create, delete, modify, read, save, save, automatic processing, continuous, and pause.

4. External IO Input: a variety of external IO input controls can be defined for convenient using .

5. Free Selection of Input Functions: the limited input port can achieve various users’ needs.

6. Hand Wheel: hold an external hand wheel to control input or host panel advanced function key analog hand wheel, hand wheel support speed mode or position mode.

System composition:

The numerical control system is mainly composed of the following parts:

1. High performance, high speed 32 bit ARM CPU, high sex function FPGA.

2. Liquid crystal display (resolution: 800 x 480).

3. Input / output (16 way photoelectric isolation 10MA input, 8 way photoelectric isolation drop tank flow 500MA output).

Technical Parameters:

1. Minimum standard data unit 0.001mm.

2. The general accuracy is positive and negative 2PP.

3. Straight line corner accuracy is one quarter of the corner bow height under normal conditions.

(can be defined as any value to meet the demand for high precision)

4. Maximum data size + 99999.999mm.

5. Maximum pulse output frequency 500KHz (all five-axis can be 500KHZ at the same time).

6. Control axis: 5-axis (X, Y, Z, A, B).

7. Number of linkage-axis: 5-axis linkage and 5-axis multi-line segment forward-looking interpolation control.

8. Hand wheel control speed mode or position mode intelligent cutting deceleration point.

9. The intelligent software is limited to predict the deceleration point ahead of time, the reverse will be automatically lifted and the control is more humanized.

10. Support U disk, built-in memory, which can expand the high storage capacity of 32G.

Package list:

1 x 5-axis Offline Motion Control