Quantity | 1 - 10 |
Price | USD300000.00 |
MOQ | 1 set |
Port | tianjin |
Packaging | Nude |
Lead Time | 45days |
The main process of Gypsum board production line includes:
1. Put Calcined Gypsum powder, water and other additives to mixer by automatic metering system and conveying system, mix to form the Gypsum slurry, evenly scattered on the surface of the continous forward movement of the protective paper;
2. With continuous moving and vibrating, Gypsum slurry gradually diffused and evenly scattered on the surface of moving bottom paper. Then it goes into the Forming machine and compund with top paper. By the process of extruding and forming, the slurry would be sealed by top paper and bottom paper. Then pulpous continous plasterboard is formed.
3. While it conveyed by setting belt, wet Gypsum board gradually formed after board shaping, natual coagulation and automatic cutting. The wet boards arranged by programmed control system, quickly enter into dryer through rollers, belt conveyor and board turnover.
4. Under strict controls in temperature zones of dryer, the wet board dried by different temperature hot air blow. The wet board keeps evaporating, modified starch would stick with the paper, then the dry Gypsum board would be transported out of dryer.
5. Then the board will be turned over again and folded together(Face inward), cut the board to certain size and edge sealed.
6. Finally it comes to automatic stacker for stacking, then it can be transported to warehouse by forklift.
Gypsum board production line Design drawings with annualy output of 2 million SQM
Specification of Gypsum board production line
SPECIFICATIONS GYSPUM BOARD MAKING MACHINE |
|||
Raw Material |
gypsum powder |
100 mesh |
|
Paper |
170gsm and 180gsm for gray paper and ivory paper |
||
modified starch |
water reducer, white latex, etc. |
||
Glue |
PVA emulsion |
||
Gypsum Board Spec. |
Length |
Width |
Thickness |
1800 to 4000mm |
1200mm, 1220mm, |
7mm to 15mm |
|
adjustable |
adjustable |
||
Product Quality Standard |
In conformity with standard of P.R.C GB/T9775-2008 paper-covered Plasterboard. |
||
Fuel Variety |
Coal, fuel oil, natural gas or liquefied petroleum gas. |
||
The output of the Gypsum board producing line (Standard of our factory ) |
from 1.5 million to 30 million square metres annually (The estimated machine floor area is 1500-9600 square meters.) |
||
Machine Core component |
PLC system/Automatic/ Different countries have different voltages |
||
Type of Drying system |
The hot air drying type |
suitable for production lines with an annual output less than 5 million square meters; low cost and low investment. |
|
Thermal oil drying type |
Suitable for large and medium-sized production lines with an annual output more than 5 million square meters; Low energy consumption, higher cost, the service life is long, the quality is easy to control. |
||
Application |
Building material machinery |
||
Installtion |
We will dispatch technicians to install and debug the machine until it can normally produce qualified products. |
Application
Paper-facted Gypsum board has good toughness, non-combustible, stable size, smooth surface, can be sawn, easy to construction, mainly used for ceiling, partition wall, interior wall veneer, ceiling, sound absorption board, etc
Brief introduction of our factory:
Xiangyi Mechanical mainly ranges of Gypsum board/powder production line, Calcium silicate production line and Egg tray machine, experienced engineers and skillful workers make us do better and better in the machinery industry. The paper-faced Gypsum board production line is the professional equipment for producing new Decoration material.
What we can offer
1. Rich experience
Over 24 years' production experience, our engineer can make the
equipment configuration feasibility report, after sign the
contract, we will offer the Foundation drawings, Wiring
diagram.
2. Most advanced technology
Xiangyi mechanical is the National High-tech enterprise, we are
always updating our production line to win more profit for our
clients. Won many customers from Iran, India, Uz, Uaz, Ujr, Iraq,
Kuwait etc.
3. Best Quality
We will use the heavy steel of "H" stype, quality is perfect, It
can make the production structure lighter 30%, saving riveting
workload 25%. And we will adopt the Steel Demolition structure
for the whole production line.
4. Customized items
Accept the Electric appliance customized, such as Siemens, Omron
from Japanese etc; Exterial colors of the Gyspum board production
line, any color you want.
5. Installation serive
We will dispatch installation engineer to install the equipment
and teach the customers' technician how to operate untill the
production line produces the qualified product.
6. After sale service
Even we had finished the handover, if you have any question after
that, please feel free to contact us, we will save all the
question for you and we can also fly to your factory if
necessary.
Exhibition
We will take part in Cantan Fair held in Guangzhou, China, Foshan Ceramics Association and some shows held abroad.
If any requirement, please feel free to contact me: xiangyijixielisa at yeah dot com or what's app: 0086 18713118368