Bucket Elevator is one of the most efficient conveying equipment
to elevate a variety of bulk materials from light to heavy and
from fine to large lumps, and it is widely used in the cement
building materials, mining, steel, chemical industry,
environmental protection, port wharf and so on. Bucket elevator
system consists of a series of hoppers attached to a belt or
chain with pulleys or sprockets located at the top and bottom of
the unit.
NSE high-speed plate chain bucket elevator is a new type of
vertical lifting equipment. It is designed and modified on the
basis of the NE bucket elelvator. After the renovation, the
lifting height and conveying capacity are greater than the NE
series of the same model. In various industrial countries, it is
widely used for conveying large volumes, powdery and small
granular materials.
1.
Large conveying capacity, this series of bucket elevator has the
largest conveying capacity among similar products with a lifting
capacity of 100m3/h~1600m3/h.
2. Wide
application, it can not only lift general powder and small
particles, but also lift materials with greater abrasiveness.
The material temperature is required to be lower than
200℃, and the
maximum lifting height is more than 50m under the rated
conveying capacity.
3. Lower
consumption, the driving power is small, adopting inflow
feeding, induction discharging, and intensive arrangement of
large-capacity hoppers. When the material is hoisted, there is
almost no material returning and digging, so the ineffective
power is saved, and the power is 30% less than the ring chain
bucket elevator .
4. Long
service life. the feeding of the equipment adopts the inflow
type, no need to use the buckets to dig the material. There are
few squeezing and collisions between the materials. The design
of this bucket elevator ensures that the materials are fed,
lifted and discharged, it is rarely scattered during these
process. The plate chain type high-strength wear-resistant
conveyor chain is used to extend the service life of the chain
and the hopper.
5. Good
airtightness and less environmental pollution.
6. Good
running performance, advanced design principles and processing
methods ensure the reliability of the whole machine.
7.
Convenient operation and maintenance, with few wearing
parts.
8. The
structure has good rigidity and high precision. The casing is
folded and embossed in the middle, with good rigidity and
beautiful appearance.
9. The
overall cost is low, and the use cost is reduced due to energy
saving and less maintenance.