Blind rivets

Product Details

Blind Rivets Overview

Blind rivets are tubular and are supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off.

We manufacture blind rivets to IFI Standards. Unlike solid rivets, blind rivets can be inserted and fully installed in a joint from only one side of a part or structure, "blind" to the opposite side. Due to this feature, blind rivets are mainly used when access to the joint is only available from one side. The rivet is placed in a pre-drilled hole and is set by pulling the mandrel head into the rivet body, expanding the rivet body, and causing it to flare against the reverse side. They are available in various head styles with standard diameters of 1/8, 5/32, and 3/16 inches. Blind rivets are made from soft aluminum alloy, steel (including stainless steel), copper, and Monel. If you are looking for high-quality fastener screws or technical support for structural design.