Port | guangzhou port |
Packaging | carton box |
Lead Time | within 7 days after we got the payment |
Brand | antiminer | payment terms | T/T,Western Union,MoneyGram USD |
Model Number: | Bitmain Antminer E3 | power | 760W |
Bitmain Antmine L3++ 580m With PSU LTC Litecoin Scrypt mining LTC dogecoin Asic Miner Machine
Bitmain |
May 2018 |
188 x 130 x 352mm |
4400g |
4 |
288 |
76db |
2 |
942W |
9*6pin |
11.60~13.00 V |
Ethernet |
0 - 40 °C |
5 - 95 % |
Bitmain released the Antminer L3 series at the
end of 2016, which comes with the self-developed
Litecoin chip BM1485. BM1485, the first Litecoin
Application Specific Integrated Circuit, is a
useful chip for Litecoin miners. Each Litecoin
miner comes with 288 such chips to deliver more
hash rates and efficiency. Antminer L3 series
include three models: Antminer L3 (250Mh/s and
power consumption 400W), Antminer L3+ (500Mh/s
and 800W), Antminer L3++ (580Mh/s and 942W).
Litecoin miners are also known as Scryptminers.
Apart from Litecoin mining, the miner is suitable
for any cryptocurrency based on Scrypt.
The Antminer L3++ has four hash boards with two
PCI-E 6PIN interfaces and four cables connected
to the controller. The data cables have a buckle
design that ensures tight contact for stable data
transfer. It comes with Bitmain's 10nm
Application Specific Integrated Circuit (ASIC)
chip, which increases efficiency and
productivity.
The Antminer L3++ comes with an APW3-12-1600-B2 power supply unit, which has a conversion rate of 93%. The indoor temperature is about 26℃ and about 20℃ at night.
The Antminer L3++ has a low power consumption
rate. It is evident that Bitmain also has people
looking to mine at home in mind. As seen in the
power consumption of the Antminer L3, L3+, L3++,
which consume the power of 800W,850W, and 942W,
respectively. For users with free electricity,
low power consumption is an added advantage as it
reduces electricity costs and brings up
profitability. Calculating the electricity cost
at 0.1 per KWh, users can still see a reasonable
profit at the end of the day.
PRODUCT DESCRIPTION
Bitmain Antminer E3 190mh 190mh/s ETC ETH mining Ethereum Asic Miner Machine
about this miner
Antminer E3 is an Ethash algorithm mining equipment manufactured by BitMain. It is able to mine Ethereum (ETH) with a maximum hashrate of 190,000,000 H/s for a power consumption of 760W. The price is USD 1262, power supply is not a part of the E3 , you will need an ATX PSU with sufficient six-pin PCIe connectors.
Power consumption of the Bitmain Antminer
E3 (180Mh)
The Antminer E3 was built to consume the
power of 800W with a voltage of 12v. This
power consumption is relatively low and is
an encouraging factor for new miners to
purchase. For miners with a low Budget for
Electricity, this miner will pass as a good
option. Miners with low power consumption
tend to be a great option for new miners
because the electricity budget is a huge
factor in determining whether the miner
makes a profit or not.
Power supply Connection of Bitmain Antminer
E3 (180Mh)
You will need an ATX PSU with sufficient
six-pin PCIe connectors. All PCIe
connectors on a hashing board need to be
connected to the PSU for the hashing board
to operate. Don't connect more than one PSU
to the same hashing board. Bitmain
recommends the APW7 to power the Antminer
E3.
Separate power supply to control board:
there will be one additional six-pin PCIe
connector on the IO board, which must be
connected to the PSU to get power. It would
be best if you were sure to power on the
miner only after all PCIe connectors are
connected to the power supply.
The Profitability of Bitmain Antminer
E3
You will still get a profitable miner even
today, even after its release in 2018. The
Antminer E3 comes with a profit ratio of
three digits. It has a profit ratio of 888
percent and an annual return percentage of
726 percent. These are some of the features
that make it an interesting Ethereum miner.
It goes without saying that most miners
will be looking for it. You better get it
before stores run out.
The manufacturer is full of confidence with the miner and offers a 44 day payback period on it.
The profitability based on the power consumption and the voltage is relatively low; it has an estimated $3.39 per day, $101.63 per month, and $1,219.54 per year profitability. Compared to other Miners, the profitability of the Antminer E3 is great, with an average of $3.39/day, the cost of production, and cost used in buying electricity, it shows to be a great source of income for miners. This is a great choice for miners on a Budget or new miners starting.
Price: On the main Bitmain website, the price goes for $1162. This is relatively high for new miners considering the profitability.