Product Details
Technical Features
1 Structural features
As for the locking ring Closure, our company can now design and
produce two structural
forms of Closures, which are inner locking ring Closure and outer
locking ring Closure.
Each structural form of Closure can be classified into vertical
type and horizontal type.
Before pressing, when a Closure cover is sent to the cylinder
flange (with a long-necked
flange) in place, the locking ring is open, the insert can be
placed inside the cylinder
flange groove and locking ring gap, and the alarm screw can be
screwed to achieve
sealing of the safety interlocking device, when the device can be
pressurized; otherwise,
the device will not boost.
Technical Features
1 Structural features
As for the locking ring Closure, our company can now design and
produce two structural
forms of Closures, which are inner locking ring Closure and outer
locking ring Closure.
Each structural form of Closure can be classified into vertical
type and horizontal type.
Before pressing, when a Closure cover is sent to the cylinder
flange (with a long-necked
flange) in place, the locking ring is open, the insert can be
placed inside the cylinder
flange groove and locking ring gap, and the alarm screw can be
screwed to achieve
sealing of the safety interlocking device, when the device can be
pressurized; otherwise,
the device will not boost.
Technical Features
1 Structural features
As for the locking ring Closure, our company can now design and
produce two structural
forms of Closures, which are inner locking ring Closure and outer
locking ring Closure.
Each structural form of Closure can be classified into vertical
type and horizontal type.
Before pressing, when a Closure cover is sent to the cylinder
flange (with a long-necked
flange) in place, the locking ring is open, the insert can be
placed inside the cylinder
flange groove and locking ring gap, and the alarm screw can be
screwed to achieve
sealing of the safety interlocking device, when the device can be
pressurized; otherwise,
the device will not boost.
Before the
device is boosted, the quick opening Closure and its locking
mechanism can
be both
locked on a predetermined operating part, and the device can
not boost if they fail
to reach
the predetermined locking position;
After
the device pressure relief, and before t opening he Closure
cover, slowly release the
alarm
screw, and the alarm screw will whistler if there is residual
pressure, when
2tightening the screw
alarm, re-checking the device status, waiting until there is no
residual
pressure
before opening again, thus avoiding security risks arising from
misuse