Air Flow Dryer, Drying Equipment for Biomass
Sawdust
Drying is important before briquetting process. To get the
superior quality of biomass briquettes with high density, it is
necessary to control the moisture of material at 8-12% exactly.
The selection of drying plant models depends on the original
moisture content of raw materials.
Wood dryer is suitable for drying materials like sawdust, rice
hull, milling wheat straw, and corn stalks and so on.
The moisture of wet materials is at 20-45%.
The moisture after drying is at 8%-12%.
Working principle:
The dryer is equipped with two fuel boilers, inlet, steel pipe,
exhaust blower (fan), air lock and cyclone. Wet materials are
input into the hopper. The fuel boiler generates hot air which
mixes with wet materials and then is sucked into the pipes by
the exhaust blower (fan) quickly. And then hot air is flowing
and going though the curving pipes and buffer (drying chamber)
of dryer, thus wet materials is finished to dry, and the dried
materials are discharged from the outlet with air lock. This
wood dryer reduces the moisture to 8-12% with the advantages of
lower cost consumption and high efficiency.
Note:
Raw materials diameter: <1mm&<5mm
Model
Specification
|
HGJ-I
|
HGJ-II
|
HGJ-III
|
Capacity-kg/h
|
300-400
|
400-500
|
800-1000
|
Diameter of raw-mm
|
< 3mm & < 5mm
|
< 3mm & < 5mm
|
< 3mm & < 5mm
|
Air temperature-°C
|
180°C~250°C
|
180°C~250°C
|
180°C~250°C
|
Centrifugal power-Airlock power-kw
|
4
|
5.5
|
7.5
|
Material in feed
|
20mm
|
20mm
|
20mm
|
Consumption-kg/h
|
10kg/h
|
20kg/h
|
25-30kg/h
|
Weight/kg
|
2000
|
3000
|
4500
|
Dimension-meter
|
20*0.85*2.2m
|
30*0.85*2.5
|
50*0.95*2.7
|
Moisture-max-°C
|
35-45
|
35-45
|
35-45
|
Dried-max-°C
|
8-12
|
8-12
|
3-10
|