5'' LCD Screen CNC Controller 4 Axis 500Khz G Code with Handwheel Mach3 Offline Computer Controller for CNC Machine

1PCS

4 Axis CNC offline Stand Alone controller

1PCS

Manual Pulse Generator

1PCS

4GB USB Flash Drive

1 Pack

USB Extension Cable

Other

English  manual  (electronic version )

Input interface

 16-circuit optocoupler coupling isolation

Output interface

 Ordinary digital 3-circuit optocoupler coupling isolation

 0-10V spindle control port with analog quantity(can be modified as PWM output);

Axis No.

 Support the 3 axis stepper motor control, 

Single axis Pulse

Max 500Khz

 Main control chip

 ARM9

Core algorithm chip

 FPGA

Screen

 5 inches TFT  480*272

Operational keys

17

Power supply

24VDC power input, minimum Current is 0.5A

G Code

USB flash disk support for G code file input,no size limited of the G-code file

MPG port

Support the general MPG in the market

Other

Jog function for each axis (continuous, step, defined distance)

 Support the operation of quickly specify the running position

 Support for “Power Cut” recovery. Data is automatically saved

 Support the origin and Limit share the same Input ports

The controller only support NPN type limited switch

1GB internal memory

 1

 The control period of each position is only 4 second

 2

 high control precision, the pulse width can be adjusted

 3

It supports the common stepper motor and servo motor

 4

 ARM+FPGA design framework

 5

 The ARM can finish the part of human-computer interface and code analysis

 6

the FPGA can finish the part of underlying algorithm and control pulse generate

 7

 The common off-line operation can be finished only by 17 keys

 8

 it supports the FANUC with high universality to be compatible with G code set

9

Port of the controller is extensible(8 Input/12 relay output)

10

It Does not need a dedicated computer for engraving machine