Product Details
GFRP Composite Rebar Crawler Type Pultrusion Machine/FRP
Fiberglass Rebar Making Machine
Because this equipment is
a customized product, the above parameters are for reference
only, please contact us if you need precise
details
Production
Diameter
|
4MM-16MM
|
Daily
production capacity(24H)
|
4000-10000
Meters Or 8000-20000
Meters
|
Equipment
working voltage
|
380V/50HZ/3P
|
Air
pressure
|
0.6-0.8Mpa
|
Total
Motor
|
15kw or
30kw
|
Center
height
|
1Meter
|
Total
equipment size(L*W*H)
|
21000*800*1800(mm)
or
21000*1100*1600(mm)
|
Our machine can
produce
2 pcs or 4
pcs
of rebar at one
time.
|
This FRP Rebar Pultrusion Making Machine equipment is a special
machine for producing glass fiber reinforced materials. It is
mainly made of fiber materials as reinforcement materials, resin
as the body, adding a certain amount of additives, and drying and
curing fiber products at a certain temperature.
1. The FRP Rebar Making Equipment is composed of creel, dipping
device, winding device, heating device, traction device, cutting
device, electric cabinet and pneumatic system.
2. The winding device adopts flexible winding wire, which will
not cut the surface fiber structure.
The 3 yarn content can reach 80%, which greatly improves the
mechanical properties of the rod body and reduces the product
cost.
4. Automatic cutting, automatic unloading, saving a lot of labor
costs.
5. It has a pre-heating function, which improves the curing
effect and can smoothly produce rods with a diameter of 25mm or
more.
6. The degree of automation is extremely high. The material
trough, the pressure rod, the winding, the drying tunnel, and the
traction are pneumatically controlled. All operations can be
completed by operating the buttons on the electric
cabinet.
9. The dust collector protects the environment and the health of
the operator.
10. It adopts a closed type, beautiful and generous, has a heat
preservation effect, and does not affect the operation.
0086 18551186172 / [email protected]