MOQ | 100 Piece |
234xl Stereo/Mono Crossover/Audio Crossover |
All the inputs and outputs are XLR balanced jacks that are bolted down to the chassis. This "nutting down" of the jacks insures that even if someone steps on a cable plugged into the unit, it's not going to tear up the circuit board inside. All crossovers feature Linkwitz-Riley 24 dB per octave filters, the professional standard |
FEATURES: |
--XLR balanced ins and outs |
--Mode switches for mono 4-way or stereo 2-way/3-way operation |
--Low frequency summed (subwoofer) output |
--x10 range switch on both channels |
--40Hz high pass (low cut) filter both channels |
--Phase reverse switch on all outputs |
--Individual level controls on all band outputs |
--24dB per octave Linkwitz-Riley filters (the professional standard) |
--Stereo/Mono status LEDs indicate the selected mode |
--2 year parts and labor as standard |
--CSA NRTL/C approved |
234XL Specifications | |
Input Connectors | XLR |
Input Type | Electronically balanced/unbalanced, RF filtered |
Input Impedance | Balanced >50k ohm, unbalanced >25k ohm |
Max Input | >+21dBu balanced or unbalanced |
CMRR | >40dB, typically >50dB at 1kHz |
Output Connectors | XLR |
Output Type | Impedance-balanaced/unbalanced, RF filtered |
Output Impedance | Balanced 200 ohm, unbalanced 100 ohm |
Max Output | >+21dBu balanced/unbalanced into 2k or greater |
Bandwidth | 20Hz to 20kHz, +/-0.5dB |
Frequency Response | < 3 Hz to > 90 kHz, +0/-3 dB |
Signal to Noise Ratio | Ref: +4 dBu, 22 kHz measurement bandwidth |
Signal-to-Noise (Stereo Mode) | >94dB (Low Output), >93dB (Mid Output), >92dB (High Output) |
Signal-to-Noise (Mono Mode) | >94dB (Low Output), >94dB (Low/Mid Output), >92dB (High/Mid Output) |
Dynamic Range | > 114 dB, unweighted, any output |
THD+Noise | < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
Interchannel Crosstalk | < -80 dB, 20 Hz to 20 kHz |
Crossover Frequencies (Stereo Mode) | Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
Crossover Frequencies (Mono Mode) | Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); High-Mid/High: 450 Hz to 9.6 kHz; Low-Mid/High-Mid: 450 Hz to 9.6 kHz |
Crossover Filter Type | Linkwitz-Riley, 24 dB/octave, state-variable |
Low cut Switch | Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
Phase Invert Switch | Inverts the phase at the output, one switch per output. |
x1 / x10 Switch | Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
Mode Switch | selects stereo 2-way or mono 3-way operation and disables all LEDs for controls that are non-functional in the selected mode. |
LF Sum Switch | selects normal (stereo) or mono-summed low frequency operation and disables Ch 2's low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
Indicators | Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
Operating Voltage | 100-120 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50 Hz |
Power Consumption | 15W |
Power Connector | IEC receptacle |
Dimensions | 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
Unit Weight | 4.0 lbs. (1.8 kg) |
Shipping Weight | 5.8 lbs. (2.6 kg) |