MOQ | 1000 Unit/Units |
Color | White | Place of Origin | Guangdong, China |
Brand Name | Domisi | Model Number | WTS2000 |
Type | Floor Heating Parts | Floor Heating Part Type | Floor Heating Thermostats |
Material | ABS + PC | Function | Room Temperature Control |
Usage | Control Heating Temperature | Backlight | Green Backlight |
Voltage | AC 230V 50Hz | Output ( standard ) | AC 230V 50Hz |
Sensor | NTC (10k) 1% | Programmability | Programmable Room Thermostat |
Accuracy | 1Celsius Degree | Certifications | RoHS CE TUV |
DOMISI TECHNOLOGY CO.,LTD is establised in
2010,engaged in energy saving consumer
electronics for many years.
Now we are mainly focus on energy saving
products, such as plug in thermostat for heating
& cooling,Wifi thermostat&Humidistat, energy
meter and electronic timer.
Our target is provide valueable products for
clients and save electricity bills for end users.
We are continually
keep the pace for recent technology, to update
our product and provide ODM service as client's
special requirement.
We are ready to hear your new ideas at any time,
and make it real product in short period.
We trust high efficiency,fast response and good
quality as always. Welcome your enquiry...
Question: Why there are no display when
loaded 2pcs AA battery?
Answer: Watch out the battery palarity as
shown in battery compartment to make sure it is
correctly loaded.
Question: Why I pressed the button but
there are no any action?
Answer: When this item is in standby
status, first press any button only acticate the
green backlight.
And then you can activate related function when
you continue press buttons.
On other hand, maybe the item is locked,because
the child lock will be activated when no
operation for 10 minutes
You can check if there are one LOCK symbol in top
of LCD.
If yes, please firstly unlock this item by press
DOWN button for 3 seconds.
Question: How to switch 12/24hours?
Answer: Please refer user manual and
switch it in CLOCK setting
Question: How to switch C/F?
Answer: Please refere user manual and
switch it in CLOCK setting
Question: How to switch Heating/Cooling
mode?
Answer: Please refer user manual and
switch it by press UP button for 3 seconds, it
will enter into switching mode.
Then press UP/DOWN button to choose your wanted
mode.
Question: Why I preset the program but no
any action when programing time is arrived?
Answer: This item can easily
activate/deactivate all programs by short press
SET button.
When all programs is activated the symbol "P"
will display next to the time.
If all program is deactivated the "P" will
disappear from LCD display
Question: Can it be wall mounted?
Answer: Yes, it is designed with back hole
and you can use suitable screw to hang on it in
wall.
Question: How to make a control group?
Answer: One remote thermsotat control can
be with many plug in socket, you only need to
press the ON/OFF buttons for 3 seconds in plug in
socket. And then press the Signal button in
remote thermsotat control, it will send pairing
code to plug in socket, repeat the steps to add
more plug in sockets. But please note, one plug
in socket can't be controled by many remote
thermsotat control.
Question: What it is the max rating for
this item?
Answer: This unit is designed with
protection fuse.
Please don't exceed below max ratings,it will
damage this unit when overload.
230V/16A/50Hz,3680W Max. (EU)
250V/13A/50Hz,3250W Max. (UK)
120V/15A/60Hz,1800W Max. (US)
Question: How to reset the remote
thermostat control?
Answer: Press UP & DOWN button at the same
time for 3 seconds, this unit will be reset to
factory setting.
Question: What is the Frequency and how
about the communication distance?
Answer: This wireless thermostat is
designed in 433.92Mhz, and distance is about 20
meters in open land.
With different wall structure and home
environment, the real distance is not the
same.
Question: I can adjust the TARGET
temperature when P1~P8 is not working by UP or
DOWN button.
Why I can't adjust the TARGET temperature when
P1~P8 is working?
Answer: When P1~P8 program is working, the
TARGET temperature is your preset value, so we
don't want it to be changed.But when not in P1~P8
time range, then you can change the TARGET
temperature as your wish.
Floor 4,Building A6,Tianrui Industrial Zone,Fuhai Street,Baoan district