1U Wide Band Optical Fiber Amplifier EDFA

Product Details

Product Introduction

The product RT-BA is designed for single-wavelength optical transmission system, mainly used in long-distance transmission system. It is Installed in the head end of the system and converters 1310nm signal or non-DWDM signal to 1550.12nm and then amplifies the signal to increase the output power and extend signal transmission distance.

The optical circuit is designed especially for digital optical fiber communication system including:
(1) lower noise figure
(2) high output booster
(3) Broad input power range and output power adjustable make it use easily.

The design of dual Power Mixed and hot swap provides longer MTBF. Also, the power system can be backed up.

Employing the intelligent temperature control system，the fan is on when the module temperature over 35℃, and it will stop as the temperature is under 30℃, which ensures the thermal stability and fan’s long life-time, moreover, the professional air flow design can also ensure the best temperature stability.

Intelligent network management system. Perfectly network interface: Ethernet, RS-485 and RS-232 network interface, and the open mib ensures the connectivity with all other network management system.

1U 1550nm DWDM Optical Amplifier EDFA BAPALA (1).webp

1U 1550nm DWDM Optical Amplifier EDFA BAPALA (2).webp

Features

This Single Channel EDFA has the following features:
➢ Wideband wavelength：1250-1650nm
➢ Low noise figure: typical is＜4.5dB
➢ Redundancy hot swap power module: 110/220VAC and -48VDC can plug mix
➢ Works for 19' or 21' racks
➢ OLED display shows and control the system parameters, LED status indication shows the alarm status
➢ Support ETH, RS232 ports by RJ45
➢ Network Management interface supporting SNMP via Ethernet port
➢ AGC (Automatic Gain Control) optical output

Environmental Characteristics

Parameters	Min.	Max.	Unit
Working Temperature	-5	+60	℃
Storage Temperature	-40	+80	℃
Humidity	5	85	%

Note: non-condensing

Mechanical/ Power/ Interface Characteristics

Parameters	Min.	Typ.	Max.	Unit
Size	1U H×D×W≤44x236x483			mm
Weight	-----	-----	6	Kg
Power Consumption1	-----	-----	18	W
Cooling	Air cool fans
Power Supply2	85/170	110/220	132/264	VAC
Interface	RS-232, Ethernet

(1)Actual consumption depends on the output power and environment temperature.
(2)110VAC, 220VAC and -48VDC are optional.

10G RTBA Optical Characteristics

Parameter	Min	Typ	Max	Units	Remark
Receive Wavelength Range	1250		1650	nm
Output Wavelength		1550.12			C-band ITU-T DWDM is optional
Output Power	------		15	dBm	Optional
Input Power1	-10		3	dBm	Optional
Output Power Stability	------		±0.1	dB
NF (In=0dBm, λ=1550nm)	------	5	5.5	dB	@cover all the input range
PMD (Polarization Mode Dispersion)	------	------	0.5	ps
PDG (Polarization Dependent Gain)	------	------	0.3	dB
RL (Optical Return Loss)	45	------	------	dB
Pump Leakage at Input & output			-30	dBm

(1): Optional.
(2): Test at 0 dBm input.

2.5G RTBA Optical Characteristics

Parameter	Min	Typ	Max	Units	Remark
Receive Wavelength Range	1250		1650	nm
Output Wavelength		1550.12			C-band ITU-T DWDM is optional
Output Power	------		19	dBm	Optional
Input Power1	-12		3	dBm	Optional
Output Power Stability	------		±0.1	dB
NF (In=0dBm, λ=1550nm)	------	5	5.5	dB	@cover all the input range
PMD (Polarization Mode Dispersion)	------	------	0.5	ps
PDG (Polarization Dependent Gain)	------	------	0.3	dB
RL (Optical Return Loss)	45	------	------	dB
Pump Leakage at Input & output			-30	dBm

(1): Optional.
(2): Test at 0 dBm input.

System Interface

1U 1550nm DWDM Optical Amplifier EDFA BAPALA (3).webp

No.	Function	Remark
1	Mounting brackets	Φ4
2	OLED Screen
3	Press key
4	Indicator light
5	Optical interface	LC/UPC
6	FAN
7	Grounding Stud
8	SNMP, RS232 communication with indicators	SNMPV1.V2C
9/10	Power Supply (110VAC/-48VDC optional)

Mechanical Dimensions

Size: 44*236*483 mm

1U Wide Band Optical Fiber Amplifier EDFA.webp

Order Information

Structure	Application	Output power	Rate	Voltage1	Voltage2	Interface	SNMP
GA1A: 1U compact dual power supply	90:RTBA	010:-10dBm	16:STM-16	1:110/220VAC(100-240V)	1:110/220VAC(100-240V)	2:SC/PC	0:W/O
		…	64:STM-64	2:-48VDC(-36- -72VDC)	2:-48VDC(-36- -72VDC)	4:FC/PC	1:W/
		120:20dBm		9:other	9:other	6:LC/PC
				0:W/O	0:W/O	9:other