12K 24K 36K 48K Carbon Fiber Infrared heating Wire

Product Details

Model: 3k 6k 12K 24K 36K 48K 96k

Resistance: 3 k 133 ohms /m

6 k 66 ohms /m

12 k 33 ohms /m

24K 17 ohms/m

Insulation: silicone rubber

1. Heating up quicckly, Than the traditional metal electrothermal materials enery saving up to 30% or more.
2. The air infrared radiation effect is good ,The health care function is remarkable.
3. Far infrared carbon fiber electic heat pipe released heat is mostly far infared radiation enery,and the metal heating body is different,It completely avoids the generation of electromagnetic field,and no surge current.
4. Carbon fiber its life (continuous burn)is more than or equal to 60 hours or more 6000-15000,In frequent start up, shutdown,and long-term continuous work and heating without oxidation and breakdown phenomena, uniform heating,and clean,Strong corrosion resistance.

Temperature Ranged: 60-200℃

Floor heating system component

Low-cost carbon fiber heating cable, carbon fiber heating wire, heating wire, new infrared heating cable

Technical data: Product name: carbon fiber heating wire

Insulation material: Silicone rubber

Maximum temperature resistance: 200C degrees

Heating temperature: According to the length of use

Heating element: 12K

Leakage current: 0.05mA/m

The product can withstand the maximum power: 25W/M

Diameter: 2.0±0.2 MM (thicker and safer)

color: White

Infrared wavelength: 8UM-18UM

Conductor resistance: 33±10%/m

How to calculate power?

Voltage * voltage ÷ resistance = electric power

12K=33 ohm/meter

For example, using a 10m 12K carbon fiber cable on 220V, the power is:

220V*220V÷10m*33=150W

15m 12K carbon fiber line 220V, power:

220V*220V÷15m*33=100W

The longer the length, the lower the power and the lower the heating temperature.

Wiring steps:

1. Put on the small copper pipe

2. Install the power cord

3. Press tightly with special crimping pliers and pull hard without breaking

4. Those with better insulation can be coated with insulation glue

5. After the heat shrinkable pipe is sleeved, tighten it with a lighter or hot-air gun

6. The conventional wiring is completed

Purchase instructions:

Power calculation formula: voltage x voltage / total resistance = power

Usage of heating line:

1. The recommended length specification of farm floor heating and farm insulation board is:

6K 7m / group paving 0.5m2 (98W)12K 10m / group paving 1 square (150W) (multiple square and multiple roots in parallel)24K 14m / group paving 1.5m2 (220W)

2. The length specification of electric heater, radiator and carbon crystal painting is:

3K 5m / group 72W 6K 7m / group 98W 24K 12.5m / group 230W

3. Length and specification of electric blanket:

12K 20m 70W single switch double electric blanket6K 14m 50W single switch double electric blanket12K is 12000 carbon fiber wires = resistance 33 ohm / m, which is suitable for greenhouse floor heating or electric blanket24K is 24000 carbon fiber wire = resistance 17 ohm / m, which is suitable for occasions with low temperature difference

Service temperature: 200 ℃

Long term operating voltage (DC 3-600v, AC 12-380v)All voltages in this range can be used Product power calculation (the follow