Port | Shenzhen |
Packaging | plywood box |
Lead Time | 15-30 |
Color | Silver gray |
Air Cooled Water Chiller Injection Molding Chiller portable chiller for Plastic Industry mold cooling chiller
Injection Molding Chiller Specification
Model |
HBC-12 | ||
nominal cooling capacity | kcal/h | 30298 | |
kw | 35.2 | ||
input power | kw | 12.34 | |
power supply | 3PH/380V/50HZ | ||
refrigerant | type | R410a | |
type of control | Expansion valve | ||
compressor | type | hermetic scroll | |
power(kw) | 9.92 | ||
condenser | type | finned copper tube + low noise outer rotor fan | |
cooling air flow(m3/h) | 12000 | ||
evaporator | type | Shell and tube | |
chilled fluid flow(m3/h) | 6.07 | ||
volume(L) | 200 | ||
inlet and outlet pipe diameter (inch) | 2 | ||
pump | power (kw) | 1.5 | |
flow rate(m3/h) | |||
lift(m) | 20 | ||
safety protection | compressor over temperature, over current, high and low pressure, over temperature, flow switch, phase sequence, phase-missing, exhaust overheating, anti-freezing | ||
weight | kg | 530 | |
dimension | mm | 1530*780*1630 |
Nominal cooling capacity is according to:
Inlet chilled fluid temperature:17℃, Outlet chilled fluid temperature: 12℃.
Inlet cooling air temperature: 30℃, Outlet cooling air temperature:35℃.
The temperature range of chilled fluid is from 5℃ to 30℃.
The air cooled chillers are better to run while the ambient temperature is below 35°C.If not, the chillers will have high pressure alarm.Air-cooled chillers designed for high ambient temperatures are excluded.