Quantity | 100 - 5000 |
Price | ton/tons |
MOQ | 1 ton/tons |
Port | World Wide |
Packaging | As buyers requirements |
Lead Time | 20 to 25 Days |
R50- R65 - IRSI CODES:
The chemical composition is the standard for R-50 R-65 Tee rails
original weigh 50 pounds per yard or heavier,6 meters long and
over. Material to be suitable for rerolling into bars and shapes.
Free from bent and twisted rails, frog, switch and guard rails,
rails with split heads and broken flanges. Continuous welded rail
may be included provided no weld is over 9 inches from end of the
piece of rail. Free from Fluff, Nonferrous inclusions, excessive
rust and other impurities. Free from war and explosives, shells,
cartridges, other arms and ammunitions used or otherwise and any
closed containers. Free from any radioactive materials, any
harmful chemicals, substances, and coatings any organic waste any
other harmful substances. Dirt, dust, rust fluff and other
impurities not allowed over 05 %. The rails are to be neatly
bundled and secured with iron wire or straps, provided with
adequate lifting hooks. Individual bundles not to exceed 5 MTW.
Used Rails R50 - R65.
Chemical Composition Used Rails:
C: 0, 54 - 0,82
Si.: 0,18-0,40
Mn: 0, 60-1, 05 S: 0.04 max
P: 0,035 max As.: 0, 01 max of Mass share
Norms: R-50 GOST7173-75 and R-65 GOST-8165-75
The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)
Used Rail
ISRI 27-29 ISRI-CODES:
(27) Rail, Steel No. 1. Standard section tee rails, original
weight 50 pounds per yard or heavier, 10 feet long and over.
Suitable for re-rolling into bars and shapes. Free from bent and
twisted rails, frog, switch, and guard rails, or rails with split
heads and broken flanges. Continuous welded rail may be included
provided no weld is over 9 inches from the end of the piece of
rail.
(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section,
original weight of 50 pounds per yard and over, 18 inches long
and under.
(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section,
original weight of 50 pounds per yard and over, 2 feet long and
under.
(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion,
original weight 50 pounds per yard and over, 3 feet long and
under.
(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.