Yozonetech High Quality Teflon FEP Heat Shrinkable Medical Grade Tubes 100% Virgin Anticorrosion Insulating sleeves Hose

Port

tianjinn

Product Details

The properties of FEP copolymer are similar to those of PTEE, but its heat resistance is slightly lower, and it can workat- 85℃ + 205℃ for a long time, andat - 200℃ +300℃ for a short time ; it has high impact strength,creep resistance, and low temperatureflexibility, which is better than PTEE ; its crystallinity is different with the heat treatment temperature, and its molding processability is good ; it is non-toxic, non sticky, electrical insulation, wear resistance and chemical stability are better than PTEE It has excellent high and low temperature resistance, oil resistance and chemical reagent resistance. It is mainly used for insulation sheath of mechanical equipment, medical equipment,communication equipment, chemical industry, automobile industry, main insulation of motor rotor, water treatment, coating of roller barrel in oil field.

Product features:

Corrosion resistance : only fluorine and alkali metals play a role in it at high temperature, and have no effect on all other inorganic organic acids, bases and esters.

High and low temperature resistance :- 85℃to 200 ℃ high temperature

Low water absorption : low water absorption < 0.01%

Incombustibility : no combustion in the air (oxygen index> 95 vo.%)

Non toxic: physiological inertia

High transparency: low refractive index in the plastic

Non stick: hydrophobic, oil repellent

Electrical property : high insulation : the dielectric constant viscosity of 60hz- 60mhz at high and low temperature is 2.1.Even if the surface is damaged by diving, there will be no conductive track.Volume resistance > 1018 Q m, surface resistance > 1013 Q, arc resistance 》165S No leakage of electricity

Low friction: dynamic friction coefficient 0.2-0.3

Machinability : easy for secondary processing, self sealing, self welding,flanging and coil tube. Heat shrinkage ratio : 1.6 :1

Heat shrinkage temperature : 120℃~ 200℃

Index name	unit	Index value
Density	g/cm³	2.12-2.18
Tensile strength	Mpa	≥14
Elongation dt break	%	175
Dielectric strength	Mv/m	30
breakdown voitage	Kv/mm	≥50

Technical index

Product specification (1.6:1)

Max ID 100 mm

Type	Supply inner diameter (mm)	After contraction I.D (mm)	W.T.post-shrink (mm)	Packaging length (m)
FEP	Φ2.40	≤1.50	0.20±0.05	1~2
FEP	Φ3.20	≤2.00	0.25±0.05	1~2
FEP	Φ4.80	≤3.00	0.25±0.05	1~2
FEP	Φ6.40	≤4.00	0.25±0.05	1~2
FEP	Φ9.60	≤6.00	0.31±0.05	1~2
FEP	Φ 12.70	≤7.90	0.38±0.05	1~2
FEP	Φ 19.10	≤11.90	0.51±0.05	1~2
FEP	Φ25.40	≤15.90	0.64±0.05	1~2
FEP	Φ38.10	≤23.80	0.76±0.05	1~2
FEP	Φ50.80	≤31.80	0.76±0.05	1~2
FEP	Φ75.20	≤47.00	0.76±0.08	1~2

Product specification (1.3:1)

Max ID 100 mm

Type	Supply inner diameter (mm)	After contraction I.D (mm)	W.T.post-shrink (mm)	Packaging length (m)
FEP	Φ0.79	≤0.69	0.20±0.05	1~2
FEP	Φ0.91	≤0.81	0.20±0.05	1~2
FEP	Φ 1.14	≤0.99	0.20±0.05	1~2
FEP	Φ 1.52	≤1.25	0.20±0.05	1~2
FEP	Φ 1.91	≤1.55	0.23±0.05	1~2
FEP	Φ2.34	≤1.83	0.23±0.05	1~2
FEP	Φ2.92	≤2.26	0.23±0.05	1~2
FEP	Φ3.58	≤2.90	0.25±0.05	1~2
FEP	Φ4.01	≤3.15	0.25±0.05	1~2
FEP	Φ4.57	≤3.63	0.25±0.05	1~2
FEP	Φ5.00	≤4.01	0.28±0.06	1~2
FEP	Φ5.72	≤4.57	0.28±0.06	1~2
FEP	Φ6.30	≤5.03	0.28±0.06	1~2
FEP	Φ7.37	≤5.74	0.28±0.06	1~2
FEP	Φ7.87	≤6.32	0.28±0.06	1~2
FEP	Φ9.27	≤7.11	0.30±0.06	1~2
FEP	Φ 10.16	≤7.90	0.30±0.06	1~2
FEP	Φ 11.18	≤8.86	0.30±0.06	1~2
FEP	Φ 12.70	≤9.73	0.38±0.06	1~2
FEP	Φ 14.73	≤11.38	0.51±0.06	1~2
FEP	Φ 16.92	≤12.95	0.51±0.06	1~2
FEP	Φ21.08	≤16.18	0.64±0.06	1~2
FEP	Φ25.40	≤19.41	0.76±0.06	1~2
FEP	Φ29.72	≤22.63	0.89±0.06	1~2
FEP	Φ33.78	≤25.91	0.89±0.06	1~2
FEP	Φ38.10	≤29.08	0.89±0.06	1~2
FEP	Φ42.32	≤32.26	0.89±0.06	1~2
FEP	Φ45.56	≤35.31	0.89±0.06	1~2
FEP	Φ50.80	≤39.88	0.89±0.06	1~2