MOQ | 1 29.99 |
Port | shenzhen |
Lead Time | 7 |
XZZ IT8390 Programmer iTE EC ITE85XX ITE83XX Series Chips
Programmer. XZZ Notebook Laptop Programmer iTE. XZZ IT8390
programmer is used to burning iTE EC ITE85XX ITE83XX Series chip
without disassembly. XZZ IT8390 Notebook computer laptop
programmer.
How to read chips?
1. Use three DuPont cables to connect the SM bus on the battery
holder of the motherboard to any ground (no connection is needed
for power supply).
2. Use the Type-C cable to connect the computer and the
programmer.
3. Power up the motherboard (the motherboard 3V can be generated
normally).
4. Software pop-up "Please Turn on ITEEC Power!" error, this is
not a recognized chip error, click "OK" (if the error continues
to report, check whether the wire is welded).
5. When the software icon lights up, click "TypeAuto" to
recognize the chip.
6. Click "Internal--Flash" at the top.
7. Click "Read" to read the chip, and click "Save" to save the
file.
How to write chips?
1. Read chip process (the first six steps are the same as the
read chip process).
2. Use three DuPont cables to connect the SM bus on the battery
holder of the motherboard to any ground (no need to connect for
power supply).
3. Use the Type-C cable to connect the computer to the
programmer.
4. Power up the motherboard (3V can be generated
normally).
5. Software pop-up "Please Turn on ITEEC Power!" error, this is
not a recognized chip error, click "OK" (if the error continues
to report, check whether the wire is welded).
6. When the software icon lights up, click "TypeAuto" to
recognize the chip.
7. Click on "Internal--Flash" at the top.
8. Make sure all four options are checked.
9. Click "Start" to write the chip.
Note:
Lenovo Intel platform and all ECs connected to BIOS do not need
to write a new program. You only need to clear the
EC