Xeltek SuperPro IS01, SPIS01, Original Advanced ISP programmer

Product Details

• Features:
• Until now,Support 201 IC manufacturer, 10281 pcs devices and keeps growing.
• 1)High speed thanks to the flexible hardware engine. Programming speed adjustable for complicated application environments brought by user target board, length of ISP cable etc.
• 2)Stand-alone and PC-Hosted (USB2.0 High Speed) dual mode;
• 3)Supports ISP programming of devices with I2C, SPI, UART, BDM, MON, MW, JTAG, CAN, ICC, RS232 and any other serial port.
• 4)ATE interface;
• 5)Over-current and ESD protection to protect your equipment;
• 6)DLL and API for easy integration into customers’ system.
  
  Hardware Specifications:
• 1) ISP cable integrates I2C, SPI, UART, BDM, MON, MW, JTAG, CAN, ICC, RS232 interfaces.
• 2) VDD (0-5.5V /0.5A) and Vpp (0-15V / 0.2A) lines provided to power the target board and the target devices.
• 3) Cable driver circuit supports target devices of voltage level 1.5-5V and is ESD protected.
• 4) USB 2.0 (high speed) interface for PC hosted mode and management of project files on SD card.
• 5) A 20 Characters x 4 lines LCD and a 6-key keypad are built with it for stand-alone operation. In stand-alone mode project files are stored on the SD card (up to 16GB). The number of the project files is limited only by the capacity of the SD card.
• 6) ATE interface is built for easy external hardware control. 6 lines SEL0-SEL5 are for project selection (maximum 64 files); 2 command lines START and STOP; 3 STATUS lines PASS, FAIL and BUSY. All signals are optical-isolated.
• 7) A universal AC adaptor of DC12V/2A is included for power supply.
• 8)WINDOWS XP/Vista/Win7/Win8/Win10 32/64bit compatibility.
  
  Software Specifications:
• 1) Supports almost all devices with ISP interface.
• 2) Supports Jam and Staple files from ACTEL and ALTERA; Direct C files from ACTEL.
• 3) Programming speed selectable (High, Normal and Low) for complicated applications such as different cable lengths, different target load characters.
• 4) Dynamic buffer function. Application examples include device S/N, MAC address, frequency or transducer calibration etc.
• 5) File format on SD: FAT16, FAT32.
• 6) Functions for IP protection: Project security, SD security, batch control, administration management etc.
• 7) API and DLL provided for easy integration into customers’ system like ICT and ATE.
• 8) Software provides the features for multiple units to work concurrently controlled by USB HUB.