Wire Winding And Torsion Testing Machine

Product Details

Wire Winding And Torsion Testing Machine

aluminium cable steel reinforced

Wire and Cable Detection Equipment

Wire Winding Testing Machine,Torsion Testing Machine

Technical parameters

1. Aluminum wire: Ф3mm-6mm, which can be wound with mandril (manual winding is suggested if the diameter is below 3mm)

2. Steel wire: Below Ф4mm 3. Working width of tension disc 200mm

4. Length of mandril 90mm

5. Winding speed 0-60min (adjustable)

6. Diameter of mandril (configuration is required in the new standard):

Ф1.24mm Ф2.25mm Ф2.75mm Ф3.0mm

Ф3.5mm Ф3.72mm Ф4.25mm Ф4.75mm

Ф6.75mm Ф11mm Ф12mm Ф14mm

Ф17mm Ф19mm

7. Torsion speed 0-60/min (adjustable) 8. Motor: Power 0.185KW

9. Rated voltage 200V 50HZ

10. Range of torsion count 999999

11. Torsion weight： 5×5Kg

JR-N wire winding and torsion testing machine is a testing machine used to test the toughness and adhesion performance of overhead stranded wire frame and (or) reinforced galvanized steel wire, which meets the requirements of GB/T3428-2002 Galvanized Steel Wire for Overhead Stranded Wire: Winding and Torsion Test.