wifi smart alarm system home kit

Product Details

Functional definitions:

I. Switch

The white light flashes fast when it is not connected to the network, the white light flashes slowly when the AP is connected to the network, and the white light goes out when it is connected to the cloud.

Two, key

1、 Short press:

When adding sensors or remote control, short press the button to exit the add device mode.

2. Long press:

Long press the button for 5 seconds (one sound), enter the AP hotspot + intelligent network mode, network light (white light) slow flashing.

Three. Arming, disarming, home mode, SOS Function Description

1. Arming: When the host enters the state of arming, all sensor triggers will trigger the alarm

2. Disarming: When the host enters the disarming state, the sensors triggered in the normal defense zone and home defense zone will not alarm. The sensors in the emergency zone will trigger the normal alarm. 3.

3. Arming at home: When the host enters the arming state at home, the sensors in the home zone will not trigger the alarm. The sensors in the normal and emergency zones will trigger and alarm normally.

4. SOS: When the SOS is triggered by remote control or APP, it will directly trigger the host to enter the alarm state and report to the cloud. (The state is: alarm tone + red flashing light);

IV. Sensor zones

1. general defence zone

2. At-home prevention zone

3. emergency prevention zone

V. App function support

1. Night light switch control

2. Control of host status (disarming, arming, home arming, SOS)

3、Countdown timer (disarm, arm, SOS)

4、Delayed arming, delayed alarm

5、Alarm tone selection

6、Sound size selection (numerical type can be considered, later compatible with third party voice control)

7, add accessories.

a. APP or remote control switch to disarm state

b. APP click on the accessory page, select sensor or remote control, click on the <+ Add> button at the bottom right corner to enter the add accessory status, red and white lights will flash alternately (when already in the add accessory status, press this button to exit the add accessory status).

c. The buzzer ticks once when the accessory is successfully added, and ticks twice when the accessory is repeatedly added.

d. When the host state is switched (disarm, arm, arm at home, SOS), it automatically exits the state of adding accessories.

e. When the night light mode is switched (on/off), it automatically exits the state of adding accessories.

VII. Third party support

1. Night light switch control

2. Voice control for arming and disarming

3. Query the status of the host

VI. Hardware function implementation

1.Arming

2.Disarming

3、Alarm

4、Night light

5、433 doorbell pairing

6、433 remote control pairing

7. 24-hour emergency zone, non-24-hour zone

8. 5v detection on power up

Parameter definition:

Power supply: AC100-240V

Built-in battery: 3.7V/500mhA (tentative)

Standby current: ＜10mA

Alarm current: ＜300mA

Wireless mode: wifi 2.4G

Alarm loudness: 100-120dB

Alarm light: Dazzling red light

Maximum number of remote controls: 5

Maximum number of other accessories: 20