MOQ | 50 Set/Sets |
Port | Qingdao/ Shanghai/ Guangzhou/ Any port in China |
Packaging | Wooden cases and cartons |
Lead Time | 5 Days |
SIZE: | 162*156*92 mm | Weight: | 2.5 kg |
Model: | N7G |
The motor vehicle cab turning mechanism belongs to the technical field of motor vehicle equipment. Its purpose is to provide a motor vehicle driving that can effectively control the matching gap between the turning shaft and the support hole, so that the turning shaft is light, flexible, and has no blocking rotation. Cab flipping mechanism. The technical points are: including the flip shafts set in the left and right support holes and the support arms connected to the bottom frame of the cab on the two ends of the flip shafts on the inner side of the left and right supports, which are characterized by : The two ends of the turning shaft (7) are respectively provided with end shafts (71), and the end shafts are respectively installed in the rolling bearings (3) arranged in the holes of the left and right supports (1,2), and the outer ends of the shafts are connected to the locks. Tight nut (6) threaded connection. Since the end shafts at both ends of the turning shaft are respectively installed in the left and right bearing holes equipped with rolling bearings, the clearance between the turning shaft and the bearing hole is effectively controlled, and the driving The chamber flips more smoothly, smoothly, lightly, and without obstruction
No. 17, North District, Xiaoluzhuang industrial park, Tianqiao district, Jinan, Shandong Province