1,Advanced
design of optical path:
A patented technique of Fourier transform
of converging light released the
scattered light at
large-scattering-angles from the
restriction of the aperture of the
Fourier lens. The focal length is reduced
to enhance the resolution of the
instrument, and ring shaped of
multi-element silicon photo-diode ensure
gathering all the light signals of
particles, highly improve the
resolution.
2,Built-in automatic wet dispersion
unit:
We carefully aligned the stirring set-up,
the ultrasonic dispersing unit and the
sample circulation pipes, and fixed them
insidethe instrument. Such a built-in
design effectively prevents the
inhomogeneous dispersion and
sedimentation of big particles, which can
be observed in the designs that these
dispersing units are separated from the
instruments, where the sample circulation
pipes are therefore too long, The sample
will be sufficiently dispersed.
3,Unconstrained fitting techniques:
The particle analysis software uses a
unique unconstrained data fitting
technique that we developed to obtain
data of real particle size distribution,
this is particularly important for
researchers.
4,Micro sample chamber (optional):
The capacity of the sample chamber is as
small as only 10ml. This helps with
measuring expensive/precious samples, or
samples difficult to be dispersed within
medium.
5,Modern measurement control:(Intelligent
SOP Operation)
Users can perform all measurement
procedures by simply operating on the PC
and have ideal results in a very short
time.
6,User-friendly Operation:
manual mode and the automatic mode,
freely choose, to measure according to
the sample features. In some conditions
(e.g. the sample have unknown features or
there are special requirements for the
measurements), users can make a test
measurement in the manual mode first, and
after having an idea of the sample
features and the measurement conditions,
measure the samples in the automatic
mode.
7,Fully automatic light path
alignment:
A precise four phase hybrid stepping
motor automatically aligns the optical
path and can adjust it at any moment,
precision is up to 0.1um, This releases
users from manual adjusting the optical
path and improved accuracy and stability
of the measurement results.
8,Quick measurements:
set “ automatic” mode, all operation
procedures are performed
automatically,automatic water supply,
automatic ultrasonic sample, stirring,
circulation,background testing, sample
testing,analysis , draining and cleaning,
which significantly reduces the time for
measurements, the full process only take
2 minutes.
9,Data analysis:
Errors in the data are rejected and the
measurement results are automatically
processed. Manual data processing is not
necessary and the output is more
standard.
Member's Area
Messages 
Need Help
Browse Through Millions of High-Quality Products. 