MOQ | 5 MT |
Port | Durban Port of South Africa |
Packaging | The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25kg. The emulsion product can be packed in plastic drum, each drum containing 50kg or 200kg for Waste Water Treatment Flocculant Polyacrylamide PAM |
Lead Time | 5-21 days |
ecification
Item |
Cationic type |
Appearance |
White fine-sand shaped power |
Solid content %≥ |
90.0 |
Molecular weight |
6 million~10 million |
Ionicity % |
5~80 |
Note: Our product can be made upon your special request.
|
Application Field
1) It is mainly used for sludge dewatering and decreases the rate of the water content of the sludge.
2) It can be used to treat industrial wastewater and domestic sewage.
3) It can be used for papermaking to improve dry and strength of paper
and to increase the reservation of tiny fibers and fillings.
Application Method
1) It should be diluted to the concentration of 0.1%(based on solid content).
It is better to use neutral or desalted water.
2) When making up a solution, the product should be scattered evenly in the stirring water,
usually, the temperature is between 50~60℃.
3) The most economical dosage is based on the trial.
Advantage
1) Easy to dissolve, dissolve time 40min.
2) High efficiency.
3) High molecular weight.
4) High purity, without impurity.
Package and Storage
Package
1) The solid product can be packed in inner plastic bags,
and further in polypropylene woven bags with each bag containing 25kg.
2) The emulsion product can be packed in a plastic drum, each drum containing 50kg or 200kg.
Storage
It should be sealed and stored in a dry and cool place below 35℃.