Loading System | closed loop micro computer, which drives a ball screw and nut for its vertical movement | Maximum Capacity | 0-2224N |
Travel (mm) approx | 600mm x 0.1mm with out tensile jaws | Speed (mm/min) | 1 to 500 mm/min |
Tensile Load Measurement Accuracy | 0.5% of indicated value or ±0.5% of full scale | Max. Stroke Limiter upper/lower | 2 |
Foam compression platens area: | 400mm x 400mm |
The Universal Testing Machine has been specially designed and manufactured to perform tests in both compression and tensile, without having to change the attachments. The universal measurement of firmness and hardness is based on a physical property called the indentation force deflection (IFD). It is calculated by determining the force required to deflect a test piece a percentage of its original thickness using a circular indentor, which applies a force, while also recording the degree of indentation. IDM Instruments Pty Ltd has designed their Universal Testing Machine with fixed dual testing capabilities comprising of compression testing on the inner and tensile testing on the outer frame. By incorporating the dual testing space design, this eliminates the need of having two machines required for testing. The same machine is used for compression and tensile testing.
Standards:
• ASTM D3574 – Test B
• ASTM D3574 – Test C
• ASTM D3574 – Test E
• ASTM D3574 – Test F
• AS 2281
• AS 2282.8
• ASTM F1566
• ISO 3386
• ISO 3386-1
• ISO 2439
• ISO 1798
• ISO 8067
• GB 10807