Tourmaline Aldehyde Water-resistant Putty

Product Details

This product is a water-resistant wall leveling material that can disperse negative ions and adsorb formaldehyde. PH 11-12. It has passed the China Ten Ring Certification and the French A+ indoor certification, and is a green and environmentally friendly product.

--Packing specification: 20KG

--Executive standard: JG/T 298-2010 "Putty for Interior Construction" (N),

JC/T1074-2021

--Product advantages: It has the functions of super water resistance, air purification and formaldehyde removal.

Product Information

Product features: 1. High strength, the national standard strength requires 0.50MPa, and the product can reach 0.70-0.73MPa.

2. Good adsorption capacity, formaldehyde purification efficiency of 94.2%, formaldehyde purification durability of 85%.

3. Good construction performance, fine white and delicate, and good workability.

4. Good water resistance, no powder falling off after soaking in water for 48 hours.

Main ingredients: calcium hydroxide, heavy calcium carbonate, tourmaline powder, formaldehyde capture powder, environmentally friendly additives.

Reference dosage: 1-1.5Kg/square meter (according to the flatness of the wall surface).

Base treatment: Remove the loose parts and impurities of the base to ensure that the base is solid and free of floating ash and dirt. The moisture content of the surface of the wall is less than 10% before the construction can be scraped.

Product mixing: According to the ratio of powder to water weight ratio of 1:0.40 (the actual proportion of water is suitable for the best construction), add water first, then add powder and stir for 3-5 minutes to form a paste, stir evenly and let stand for 5~10 minutes, and then fully stir to use.

Batch scraping and leveling: The thickness of this product should be between 0.5-1.0mm for a single batch scraping, and it is easy to dry shrinkage and crack if the thickness of a batch scraping is too thick. Attention should be paid to the surface humidity of the putty during the light collection construction, which will cause peeling and depowdering when it is too dry. After curing, it can be sanded and leveled with sandpaper.

Executive Standards:

Technical standard: JG/T 298-2010 "Putty for Architectural Interiors" (R).

Environmental protection standard: GB 18582-2020 "Limits of Harmful Substances in Building Wall Coatings"

Adsorption standard: JC/T1074-2021 "Purification Performance of Indoor Air Purification Function Coating Materials" IF Class W type

Construction temperature: The construction environment temperature should be between 5°C~35°C.

Storage and transportation: Store in a cool, dry place to protect from moisture. The product has a shelf life of 12 months. The product is safe and non-combustible, and the storage and transportation can be handled as non-dangerous goods.