Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test the CFL/LED which meets IES LM-80-08, electricity products, automative cars, home appications and mobiles.
Climate chamber is used to simulate a temperature environmental condistions. It may also be called environmental chambers or thermal chamber or temperature chamber. You can click the below videos to learn the details and also how to operate it.
Specifications:
•The temperature humidity test chamber is made of SUS304
Steel. The thermal insulation layer is made of polyurethane hard
foam ultra-fine glass fiber. The heat-insulated doorframe uses
high temperature aging silicone rubber sealing strip.
•The temperature controller of the climate chamber includes
Korean TEMI display in English/Chinese and German Siemens PLC. It
can communicate with PC via RS-232. The temperature accuracy is
0.1℃ and humidity accuracy is 0.1%R.H
•The temperature sensor is platinum PT100Ω/MV
•The independant heating system uses nickel-chrome electric
heater
•The refrigerating system is fully enclosed air-cooled
single-stage compression refrigeration mode, and the compressor
is from France TECUMSEH brand which can allow you get after sales
support from many other countries
•The circulation system uses temperature resistant and low noise
air-conditioned motor and multi-blade centrifugal wind
wheel
•The safety protection system includes electric leakage, short
circuit, over temperature, motor overheating, compressor
pressure, overload, over-current protection
•Working Voltage: AC380V±10% 3phases and frequency
50Hz/60Hz
•Working Environmental: Temperature is 5℃~+30℃ Humidity ≤85%R.H
High & Low Temperature Humidity Chamber with Programmable Function (GDJS Series) | ||||||
LISUN Model | GDJS-100* | GDJS-225* | GDJS-500* | GDJS-010* | GDJS-015* | GDJS-020* |
Workroom Dimensions | 41*55*45 | 50*60*75 | 70*80*90 | 100*100*100 | 100*100*150 | 100*100*200 |
External Dimensions | 105*105*156 | 105*102*200 | 132*132*217 | 167*152*231 | 245*160*231 | 160*254*214 |
Working Power | 5.5kW | 7.0kW | 13.5kW | 15.0kW | 16.5kW | 26.5kW |
Temperature Range | A: -20℃-150℃ B: -40℃-150℃ C: -60℃-150℃ D: -70℃-150℃ | |||||
Humidity Range | 30%~98% R.H | |||||
Fluctuation/Evenness | ±0.5℃/±2℃ | |||||
Humidity Deviation | -2%~-3% R.H | |||||
Temperature Rise Speed | 1.0℃~3.0℃/min | |||||
Temperature Fall Speed | 0.7℃~1.0℃/min |
High and Low Temperature Chamber with Programmable Function (GDJW Series) | ||||||
LISUN Model | GDJW-100* | GDJW-225* | GDJW-500* | GDJW-010* | GDJW-015* | GDJW-020* |
Workroom Dimensions (cm) | 41*55*45 | 50*60*75 | 70*80*90 | 100*100*100 | 100*100*150 | 160*254*214 |
Temperature Range | A: -20℃-150℃ B: -40℃-150℃ C: -60℃-150℃ D: -70℃-150℃ | |||||
Fluctuation/Evenness | ±0.5℃/±2℃ | |||||
Temperature Rise Speed | 1.0℃~3.0℃/min | |||||
Temperature Fall Speed | 0.7℃~1.0℃/min |
High Temperature Chamber/Oven Chamber/Aging Oven Testing (GW Series) | ||||||
LISUN Model | GW-100 | GW-225 | GW-500 | GW-010 | GW-015 | GW-020 |
Workroom Dimensions (cm) | 41*55*45 | 50*60*75 | 70*80*90 | 100*100*100 | 100*100*150 | 160*254*214 |
Temperature Range | Enviromental Temperature ~250℃ (Option to 300℃) | |||||
Fluctuation/Evenness | ±0.5℃/±2℃ | |||||
Temperature Rise Speed | 1.0℃~3.0℃/min |
The * in GDJS-225*/GDJW-225* means the temperature range A:
-20℃-150℃, B: -40℃-150℃, C: -60℃-150℃,D: -70℃-150℃
The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food, trolleys, vulcanized rubber, plastic rubber, metal materials and other commodities. The whole process of humidification of the temperature and humidity environmental chamber is to increase the working pressure of water vapor. The more initial way is to spray water on the test box wall to control the saturation pressure of the water surface according to the operating temperature.
1. LISUN low temperature such as -60℃ warranty under a 200W
lamps with heating but other brands under empty
conditions.
2. LISUN adopts with Finland brand electronic humidity sensor
which no need to maintenence. But our competitor used dry ball
device which is easy dry to cause problems after used
3-6months.
3. LISUN equipped a water purification device, customer can use
a water pipe connect it to provide water supply directly, our
competitor but need to add the water by hand.
4. LISUN temperature chamber key electrical connector parts
adopted with famous brand AC contactor and solid state relays
from Schneider and Omron brands. It is easy for you to find in
your local market if they were failed, but our competitors used
them with almost Chinese local brands.