Product Details
Taisn General Purpose RTV Silicone Gasket Maker & Silicone Gasket
Adhesive with 2g super glue. Equal to ABRO 999 gasket maker.
Characteristics:
one-component, fast cure, good thixotropy, easy to inject,
high-classified red rtv silicone gasket maker/adhesive. it can
make almost any gasket instantly by replacing mostly cut gaskets
without causing metal corrosion. no dripping on elevation
coating, and no shrinkage after cured. Also,it can tolerant the
high temperature up to 320°c and has excellent resistance of oil,
water, and transmission fluid.
Technical data sheet:
Description
|
Acetoxy, Neutral
|
Appearance
|
Paste
|
Specific Gravity ( g/cm3)
|
1.05~1.10
|
Skin time( min) T: 22°C, R.H.: 40% ~ 60%
|
3~5
|
Tack free time(min) T: 22°C, R.H.: 40% ~ 60%
|
20
|
Cure Rate (mm) T: 22°C, R.H.: 40% ~ 60%
|
4.0
|
Hardness(shore A)
|
>35
|
Elongation, %
|
>200
|
Tensile Strength, N/mm2
|
>2.10
|
Lifespan
|
1 year
|
Color
|
Blue, black, red, grey, white and clear
|
Packing
|
55g, 85g, 100g and 310ml
|
Working Temperature
|
-60°C to 320°C
|
Packing type
|
85g/card, 120pcs/carton. Carton size: 46x28x44 cm
|
100g/card, 120pcs/carton. Carton size: 46x28x44 cm
|
PRIVATE LABLE SERVICE IS HIGHLY WELCOME, AND MOQ IS 30000PCS EACH
COLOR.
We can customize 25g, 32g and 35g packing in blister card depend
on your request.
Applications:
Sealing and anti-shaking of engines, valve cages, bonnets and
other mechanical parts in cars, motorcycles, farming machines,
also, seal in high-temp fields, like in machinery, electronic,
chemicals, and hardware, etc.
User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare
flange surfaces. Dry and remove all oil and grease
2. Remove the cap, puncture inner seal of the tube, screw on
nozzle with a desired size
3. Apply continuous, uniform 1~4mm bead around perimeter of one
surface. or completely surround all bolt holes
4. Wait about 10 minutes for glue to skin over. Then reassemble
the parts
5. Gasket maker dries to touch in 1 hour and allow to bond after
24 hour fully curing.
Notes:
1. Clean the assembled parts by removing the oil and grease.
2. it will release some acid odor when assemble the parts, so
using in an adequate ventilated place.
3. Screw the nozzle tightly after using in order to avoid its
curing inside the tube
4.Keep away from children.