Stainless Steel 2pc Thread Ball Valve

Product Details

The two pcs ball valve works by rotating the valve core to flow and keep the valve smooth or closed.

2 PIECE BALL VALVE

The 2pc ball valve is probably the most widely used ball valve. 2-piece ball valves can quickly and easily open or close the flow of most liquids and gases for any application where a simple on/off action is required. It is also possible to control the flow rate to varying degrees by partially opening or closing the valve. Also known as bi-directional ball valves because they allow direct flow in either direction from inlet to outlet. As threaded ball valves, they are quick to install, easy to use and require no tools for installation. The two-piece ball valve is the best priced full port ball valve (full bore) allowing the internal diameter of the pipe to remain unrestricted. This means that the 2pc Ball Valve has no pressure drop and maintains a high flow rate.

Threaded ports are female NPT for easy connection

Full port ball valve, maximum internal diameter also called full bore

Lockable handle lever with anti-jet stem

Pressure ratings up to 1000PSI Suitable for most standard applications

PTFE seals and seats for chemical and high heat applications

Sizes start at 1/4" and end at 4"

Features

ISO 9002

Threaded ends to ASME B 1.20.1 (NPT) standard.

Investment casting

Explosion-proof valve stem

Full Port

1000 psi W.O.G.

15% glass-filled PTFE reinforced seats

PTFE seals and packing

Mounting pad drilled and tapped (1/4", 3/8" and 1/2" sizes only)

Latching handle

All valves tested and inspected in accordance with API-598

Operational Principle

The two pcs ball valve works by rotating the valve core to flow and keep the valve smooth or closed. The ball valve switch is light, small, and can be made into a large Size, reliable seal, simple structure and convenient maintenance. The sealing surface and sphere are often closed, which is not easy to be eroded by the medium, and has been widely used in various industries. In the last laps of the hand wheel, the angular plane at the bottom of the stem mechanically wedges against the sphere so that it is tightly pressed on the seat to a complete seal.

1. Nominal pressure or pressure level: PN1.0-32.0MPa, ANSI CLASS 150-900, JIS10-20K;

2. Nominal pass diameter or caliber: DN6~900, NPS 1 / 4 ~36;

3. Connection method: flange, counterwelding, thread, bearing welding, etc.;

4. Suitable temperature: -196℃ ~540℃;

5. Driving mode: manual, cochlear worm transmission, pneumatic, electric, liquid movement, gas-liquid linkage, electric-liquid linkage;

6. Valve body materials: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8 (304), CF3 (304L), CF8M (316), CF3M (316L), and Ti. Choose different materials, which can be suitable for water, steam, oil products, nitric acid, acetic acid, oxidative medium, urea and other media respectively

Certificate: ISO9000, CE

If you are interested in our products, please contact us.