Type | Evacuated Tube | Circulation Type | Indirect / Closed Loop (Active) |
Connection Type | SPLIT | Installation | FREESTANDING |
Housing Material | STAINLESS STEEL | Certification | ce, CCC,ISO |
Capacity | 100 | Place of Origin | Zhejiang, China |
Brand Name | Jinneng | Model Number | JN-100-10 |
Product name | Split Pressurized solar water heater | Inner tank | SUS304-2B 1.2/1.5/2.0/2.5mm thickness |
Outer tank | Galvanized Steel/0.5mm | Application | Washing/Bath |
Item | Pressure Solar Water Heter | Vacuum tube | 58mm/1800mm |
heat pipe | 14*0.6mm | Warranty | 5 Years |
Use | Shower Room | working pressure | 4bar |
A). The solar collector can connect to the
pressured water tank and it can be installed on
the flat with stand or mounting on the sloping
roof without support stand
B). The heat pipe vacuum tube absorbs the heat
energy from sunlight, because there is a
closed-loop between water tank and solar
collector, so the heat can transfer to water tank
from the solar collector
C). The conduct medium is Glycol and water
mixture, it can endure the very low temperature
and anti freeze, meanwhile it can exchange heat
energy with cold water in the water tank
D). With help of the controller system, it can
balance the temperature of the water tank and the
solar collector. When the temperature difference
is higher than preset value, the controller
system will start the circulation pump and the
heat energy can be transferred between the water
tank and solar collector
E). The controller can also control the
electrical heater booster; The temperature can be
preset with digital adjustor. When the T of the
water in the water tank is higher than the preset
value.
F). The water tank has a very long insulation
period, so the temperature of the hot water can
be protected for 72hours