split case pump | volute pump |
Now we are the largest manufacturer for the split casing
centrifugal pump and various pumps in China presently, especially
the industrial big pump. Now we make pumps for ITT and Toshiba
for OEM manufacture. The biggested impeller for single stage can
be up to 2.6m. The highest head can be up to
240m.
Technical advantage
With short gaps in the both ends of support, this type pump works
stably with less noise and vibration. It can be risen speed
operation to meet wider usage.
Being inlet and outlet located in the same center line, the
pipelines arrangement looks simple and
beautiful.
The rotor can be operated in reverse direction to avoid damage to
the pumps from water hammer.
Unique design of high temperature, using middle support,
thickening pump casing, seal cooling and oil lubrication bearing
make this type pump suitable for working at 200C, especially for
heat supply newtwork requirements.
This type pump case body can be vertically or horizontally
installation acoording to different working condition, with
mechanical seals or packing seals.
Wtih industrial designs to the shape of this type pump, the line
of pump is clear and beautiful to in line with modern
aesthetics.
Cost advantage
1. Using the advanced hydraulic model, the efficiency of this
pump is 2%~3% higher than the same type pumps. The operating cost
minimum.
2. The vacuum height of this type pump is risen 1-3 meter to
reduce land construction investment and to extend the service
life.
3. Using inport brand bearing, such as SKF, NSK and using various
pump material make this type pump suitable for any site working
condition and minimize the maintenance cost.
Maintenance advantage
1. With container type mechanical seal, the mechanical seal of
pump is very easy and simple to replace.
2. With elastic ripess assembling, the rotor parts is easy and
rapid to assembly and disassembly.
3. It is unnecessary to make adjustment to any gap when
assembling.