single phase and CE certificates AC MOTOR YY78-50-4

Quick Details (View All)

Place of Origin	Jiangsu, China	Brand Name	CH
Model Number	YY94-45-4	Type	Asynchronous Motor
Frequency	50/60Hz	Phase	Three-phase
Certification	CCC, ce, RoHS	Protect Feature	Explosion-proof
AC Voltage	208-230 / 240 V	Efficiency	Ie 3
Rated Voltage	100V/110V/220V/240V	Rated Current	0.9A-
Rated Power	90W-1000W	Rated Speed	1000-5000RPM
Insolation Level	CW/CCW	IP grade	IP22
Noise Level	<65	Temperature	<75K
Enviroment Temp	-10u2103-65u2103	Product Name	AC MOTOR

Product Details

Product Description

Specification of YY94-45-4
No.	Item	Parameters	Note
1	Rated Voltage (V)	220V	Check
2	Rated Current (A)	0.9±0.1	Check
3	Rated Input Power (W)	90W	Check
4	Rated Speed (rpm)	1250	Check
5	No Load Current (A)	≤1.2A	Check
6	No Load Speed (rpm)	1460±30rpm	Check
7	Direction (CW/CCW)	CW
8	Insulation Level	B Class
9	IP Grade	IP22
10	Use Environment Temp(℃)	-10℃-65℃
11	Save Temperature (℃)	-10℃-50℃
12	Save Humidity (%)	≤85
13	No Load Current (A)	≤0.5A	Check
14	Noise Level	≤65dB
15	Vibration	≤2.2mm/S
16	Temperature Rise	≤75K
Test Condition
1.Environment Temperature 25±5℃.
2.Noise:Distance 900mm,The motor is Noload when test, background noise less than 65 dB(A).
3.Mechanical Vibration: The motor according to GB10068.1 to test, when the motor running without load,The speed is not bigger than 2.2mm/s
4.Insulation Resistance:In the usual temperature the resistance ≥20MΩ,hot condition ≥5MΩ
5,Insulation Compressive Strength:1,Electrical Strength:After the motor insulation treatment, Add AC1500V/1min /2mA between the rotor and housing, there is no flashing and breakdown appearance. Or add AC1800 /1S /2mA,there is no flashing and breakdown appearance.
6,Starting Voltage:Under the usual temperature, rated frequency, voltage 185V and without load, that Can meet the performance of the motor requests.
(when you have any question on the security of the products, please inform our factory)
Safety	1. For wires and switch relays: Please consider the electrical capacity and heat resistance. Use the Suitable products.
	2. When set on the motor and match the wire, please note that do not break the coil,wire and edge of the motor. Otherwise,it may cause electric shock burning fire.
	3. During power on, please do not touch the rotating part by hand, it is easy to hurt, please take care.
	4. There is no warning sign on the motor, because the motor is put into other products, if you need the warning sign, please contact us.
Usage Note	(1)Temperature have a great impact on the life time of the motor, when you ,when you install the motor on your products, please set on the temperature under 90℃.
	(2)Do not allow the bearing high temperature state continued, if the high temperature( the maximum temperature is 90.) state continues, due to deterioration of bearings, will cause noise, vibration and life short.
	(3)If your products in a unique way for speed control of the motor, please confirm the use of voltage rand, load fluctuations and other factors firstly.
	(4)For noise, surges, momentary power failure, static electricity caused by malfunction, please note on your products,
	(5)When you use the motor on your product, please make sure to install the motor correctly. Incorrect installation is the root causes of noise and vibration of the motor, but also to bring a bad bearing life.
	(6)Please do not move the motor by wires and shaft.
	(7)When the motor drop or by the equivalent impact, it will cause insulation, bearing failure and so on. Please do not use the motor again.
	(8)Please do not disassemble this product, its safety performance and other properties will not be guaranteed if you do that.
	(9)Please do not put the motor touch with (H2O,SO2,NO2,CL2) and other toxic gases, please confirm your products include the upper gases or not, if yes, the motor life and other performance will be broken.
	(10)How to save the motor, make sure there is no toxic gases, and the temperature range between -10~50℃, the humidity under 85% .If you save the motor for long time(More than 6 months),please noted the temperature and condition carefully. The motor may rust also.
Duty	(1)Please confirm if the motor structure, size, lift, noise, vibration and other parameters can match your product totally.
	If your application range beyond the instruction, we can not make sure the products work well
	(3)If your products that work with the motor have any change, please contact and inform us the change.
	(4)If the motor have any change, we will send the new instruction to you to re-confirm, and we will provide the new sample for your test firstly. To improve the motor, we may change some parts of the motor.
	(5)If you have any points need to talk with us but there is no on the instruction, please contact us In advance.
	(6)If the motor can not match your product according to the instruction, please contact with us.
	(7)Please do not disclose this specification to any third parties.