Lead Time | Production and dispatch time deeply depends on the order volume of the exact client and logistics time also depends on the client's country of delivery. |
The recuperator Climtec RD 200+ Standard is installed in a room with a recommended area of 90 m². The volume of exhaust and supply air provided by the recuperator at maximum operation is 240 m³/h. The recuperator is equipped with a G3 air purification filter and a remote control (on/off and control of four speed modes). Flow shut-off valves close and open automatically.
The recuperator Climtec 200+ Standard removes the used air from the room through an aluminum heat exchanger and at the same time fills it with fresh air from the street, heating the room in the cold season and cooling it in the hot season. At the same time, the air flows do not mix, but move in different channels of the heat exchanger. The advantage of the aluminum heat exchanger is its resistance to oxidation.
Diameter of the body of the working module without insulation, mm | 200 |
Diameter of the mounting hole, mm | 225 |
Length, mm | 525-1000 |
Weight, kg | 6 |
Recovery efficiency, % | 93 |
Volume of supply/exhaust air, m³/h. | 240/240 |
Recommended area of the premises, m² | 90 |
Recommended number of people in the room | 8 |
Voltage, V | 220/230 |
Power, W | 30 |
Noise level, dB | 32 |
The power of the reheating heating element, W | 300 |
Aluminum diametrically plate heat exchanger | + |
Flow shut-off valve | auto |
Management system | remote control |
Heat exchange area of the heat exchanger (heat exchanger) | 2.7m² |