Priced Directional Butterfly Valve
for Water Treatment
Valve body is completely covered inside with rubber
preventing the fluid to be in contact with the valve body,
avoiding corrosion.
The disc is designed to produce a minimum of head loss and
turbulence.
Stem made of one piece, stainless steel, sealed by o-ring
and not in contact with the fluid.
Resistant to abrasion and corrosionLow pressure drop,
resulting in energy savings and minimum
maintenance.
Only the disc and seat are in contact with the
fluid.
No joints are needed for mounting between
flanges.
The sealing seat is made of one piece and is available in
EPDM or NBR.
Hydrostatic test pressure for seat: PN x 1.1, for shell: PN
x 1.5 according to EN 12266-1.
Performance parameters:
DN
|
40-----1200 mm
|
PN
|
1.0----1.6 MPa
|
Suitable temperatur
|
100 °C max
|
Media
|
Water, gas, oil.
|