Premium Quality HDPE / LDPE / LLDPE/PP Recycled and Virgin Granules

FOB Price 700 - 2500 USD / MT

Quantity	28 - 5000
Price	600

MOQ	28 MT
Port	LAEM CHABANG
Packaging	25 & 50 KG PP BAGS
Lead Time	15 Days

Product Details

pecifications:

1. Virgin & Recycled
2. Type: Film grade, Injection molding grade, Blowing molding grade, extrusion grade,
3. Pack: 25kg/bag

Virgin & Recycled HDPE / LDPE / LLDPE/PP granules

1. we are direct factory, different MFR or MFI are available for your different usage.
2. good quality and reasonable price
3. non-poteonods no smell adurless
4. it can replaced original plastic material, sometimes it can replace new material

HDPE:

HDPE cable material Property	Unit	Typical Value
Mass density	g/cm 3	0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)	g/10min	≤1.0
Tensile yield strength	MPa	≥19.0
Flexural modulus	Mpa	≥965
Elongation@ break	%	≥400
Impact Embrittlement temperature	centidegree	MAX -118
Dielectric Constant	100KHZ	2.32
Dielectric Constant	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
Loss Tangent	1MHZ	MAX 0.0001
Volume resistivity	OHM-CM	MIN 1x10 15
Application	Mainly used for the production of high toughness of the telephone,cable insulation material

LDPE:

Physical Properties		Test Method	Nominal Value	Unit
Density		ISO 1183	0.921	g/cm3
Melt Mass-Flow Rate (MFR)		ISO 1133	1.9	g/10min
Hardness
Shore Hardness (shore D)		ISO 868	45
Mechanical Properties
Tensile Modulus		ISO 527-2	175	MPa
Tensile Strength	Yield,	ISO 527-2	9.0	MPa
Tensile Strength	Break,	ISO 527-2	13.0	MPa
Tensile Strain(Break)		ISO 527-2	850	%
Modulus of Elasticity		Internal Method	250	MPa
Thermal
Vicat Softening Temperature		ISO 306/A50	89.0	°C
Melting Temperature (DSC)		DIN 53765	108	°C
Peak Crystallization Temperature (DSC)		DIN 53765	97.0	°C
Heat of Fusion		DIN 53765	110	J/g
Electrical
Volume Resistivity		ASTM D257	8.5E+15	ohm •cm
Dielectric Strength		ASTM D149	30.0	kV/mm
Dielectric Constant (60Hz)		ASTM D150	2.20	%
Dissipation Factor (60 Hz)		ASTM D150	0.00050

LLDPE

Properties	Test conditon	Test method	Test data	Unit
Density			0.91
MFI			2
Drop impact strength		ASTM D-1709	90	g
Elongation ,vertical/horizontal		ASTM D-882	600/800	%
tensilestrength,thermal resistance		ASTM D-1004	105/95	Kg/cm
elongation		ASTM D-638	930	%
tensile strength		ASTM D-638	180
tensile strength,vertical/horizontal		ASTM D-882	380/350
Vicat softening point		ASTM D-1525	103	°C
melting point		ASTM D-2117	126	°C
Turbidity		ASTM D-1009	12	%
45 glossness		ASTM D-2457	75	%