PDH Series 100-200W Half brick dc dc converter

Product Details

PDH Series 100-200W Half brick dc dc converter.Product details are as follows:

※Features

●Industry standard half brick

●Wide input voltage

●High voltage isolation

●Control and Trim functions

●High Efficiency

Conditions:All specifications are tested under the room temperature 25℃, normal input voltage and pure negative normal load.

※Input Characteristic

Voltage Range

24VDC (Normal Rated Value): 18～36 VDC

48VDC (Normal Rated Value): 36～72 VDC

110VDC (Normal Rated Value): 66～154 VDC

※Output Characteristic

●Voltage set-point accuracy ……±2%

●Line Regulation (full load) ……±0.5%

●Load regulation (20%-100%load) ……±0.5%

●Trim Range ……±10%

※General Characteristic

●Switching frequency ………200-350 KHz

●Isolation resistance ………200 MΩ

※Isolation voltage

●Input-output: >1500 VDC

●Input-case: >1050 VDC

●Output-case: >500 VDC

※Environmental Characteristic

●Substrate Working Temperature ………Industry: -40-+100℃

●Storage temperature ……………………Industry: -45-+105℃

※REM Features

Positive Logic:High level or no connect working

Output voltage remote compensation max:105%Vo

※Dimensions:61*57.90*12.70mm

※Protection Features

●Input under voltage protection ●Output short circuit protection

●Input over voltage protection ●Output over current protection

●Output over voltage protection ●Over temperature protection

※Model selection

Remark:Only typical models are listed. For other models, please determine the power, input voltage and output voltage and send an email to [email protected].

※Mechanical Drawing & Pin definition