PCD Cutting Tool Blanks
E-Grind supplies the whole range of pcbn cutting tools. The largest Diameter available can be 55mm. Our PCD products provides high wearing resistance ability and high finishing surface.
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for material PCD . With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process. We have pcd sales, if you need pcd metal, pease contact us.
Application of PCD:
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
Nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCD disc,
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available
specification
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
0.85μm |
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
||
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|||||
2μm |
For good surface finishing |
ET02 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|||||
5μm |
ET05 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
||||
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
||||
302μm |
ET302 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
Room 1841, Tower A, Wanda Plaza, 171#, Zhongyuan Road, Zhengzhou City, Henan Province, China