Parking space lock

Product Details

CC3S remote control parking lock product description

Pictures, etc. are for explanatory and illustrative purposes only, and there may be differences with the product, please use in kind

Shall prevail. If the information contained in this manual is changed due to product version upgrade, modification, etc.,

Without prior notice. The company reserves the right of final interpretation of intellectual property rights and related documents.

Product Introduction:

This parking lock adopts integrated forming structure, the structure is more robust, pressure resistant, more stable. Is specific to a placeholder parking, dedicated parking management designs from intelligent self-service management system requirements, the use of advanced the wear resistance of transmission technology, the overall sealing waterproofing design, high strength, anti-collision pressure, the device can be used for a variety of open space, such as commercial plaza, the hotel yard, parking Spaces, parking Spaces surrounding the community such as enclosed, Installation of open parking Spaces with more people and vehicles.

Advantages and Features:

(1) Security ：

1. Sensing the position of the car bottom is used to control the lock. In the process of lifting the lock plate, there is a vehicle defense Pressure device, the car after leaving the automatic spring.

2, the lock plate down, the lock plate strength is light, can prevent accidents, and has a timeout power off function.

(2) Durability ：

1，The driving part is driven by low power motor, so that it can reduce the use cost and be lightweight.

2, low power consumption, motor running time is short, high precision, long service life.

3, the whole machine adopts integrated forming structure, the structure is more robust, pressure resistant, more stable.

（3）Reliability：

1. The parking lock has a self-protection mechanism to effectively control the abnormal use of the equipment Damage, in the state of power failure, can carry out emergency treatment problems, with good maintenance.

2, parking lock contains multiple sensors, vehicle detector, high efficiency, high sensitivity monitoring car Before and after the car stopped.

(4) practicality ：

1. Intelligent parking lock has waterproof, anti-pressure and anti-collision functions.

2. The top of the lock plate can bear 5T pressure when it is raised, which can effectively avoid the vehicle from crushing the lock.

3. Easy to operate, press the remote control to lower the lock after the vehicle enters the site, the tailgate will rise automatically when the car leaves.

4. It can effectively prevent parking space from being occupied.

5, the channel is small, other vehicles in and out of the convenience, not easy to touch the parking lock.

Technical parameters:

The ground type parking lock is composed of a baffle, a base, a driving unit, a battery and a transmission mechanism.

Installation instructions:

1. Impact drill

2 No. 10 drill bit

3 No. 8 expansion nut

4 hex wrench

5, ordinary hammer.

Geological requirements: the installation ground needs to be level ground, if your parking space is soil geology needs to use cement pouring

Built into a parking lock size of about 1000x1000mm can be installed.

Lock control function:

After the customer successfully installs the parking lock, the relevant operation command can be sent and controlled by remote control

Lifting action of parking lock.

Precautions for use:

(1) The installation of parking lock depends on the actual situation of the site, and is covered by U-shaped parking space limiter

Above the cabin, provide vehicle parking limit and protect intelligent parking lock function.

(2) Customers need to strictly comply with the product instructions when wiring and installing the intelligent parking lock

Do not connect the RS485 serial port to the 12V dc power cable incorrectly according to the wiring rules in the book.