Packaging | wooden box |
Product
Introduction
In order to
meet the needs of the rapid development of mineral processing,
electric power, metallurgy, coal and other industries, improve
the models of slurry pumps under high head conditions, and then
summarize the experience at home and abroad and the comprehensive
information fed back by users, our company has developed a new
generation of PZX series slurry pumps with high efficiency, large
flow, high field range and multi-stage series connection by using
modern advanced technology and scientific research achievements.
The main features of this series of products are as
follows:
This series of pumps are horizontal, single stage, single suction, cantilever and double pump casing centrifugal slurry pumps.modern CAM design method is adopted, with excellent hydraulic performance, high efficiency and low wear rate. Auxiliary impeller and packing combined sealand mechanical seal are adopted to ensure no leakage of slurry.wide flow channel, good anti blocking performance and excellent cavitation performance.
Reliability
design ensures that the mean time between failures (MTBF) of the
whole machine is greatly improved.
Thin oil
lubrication and metric bearings shall be adopted, and the
lubrication and cooling system shall be reasonably set to ensure
that the bearings operate at low temperature.
The flow
passage parts are made of special materials with good wear and
corrosion resistance.
It can be used in series in multiple stages within the allowable pressure range, and its allowable maximum working pressure is 3.6mpa.
The
transmission mode of PZX series slurry pump is mainly direct
connection, and the flow head of the pump is adjusted by cutting
the outer diameter of the impeller.
The pump
has the advantages of few specifications and models and
convenient selection.
The utility
model has the advantages of reasonable structure, high
efficiency, reliable operation and convenient
maintenance.
Detailed
Photos
Technical
Parameters
Model | Distribution power P(KW) | Flow Q(m³/h) | Head H(m) | Rotational speed n(r/min) | Efficiency η% | Cavitation allowance NPSH(m) | Impeller diameter D(mm) | Weightkg) |
85PZX | 30-55 | 56-120 | 61-58 | 1480 | 47-62 | 4.5-3 | 390 | 1850 |
11-15 | 37-76 | 25-26 | 980 | 47-62 | 2.0-1.3 | 1850 | ||
100PZX | 90-132 | 100-210 | 91-87 | 1480 | 48-66 | 5.2-2.7 | 485 | 2500 |
22-37 | 68-135 | 40-38 | 980 | 48-66 | 1.2-2.3 | 2500 | ||
75-90 | 93-187 | 77-73 | 1480 | 48-66 | 4.4-2.3 | 445 | 2500 | |
18.5-30 | 61-126 | 34-32 | 980 | 48-66 | 1.9-1.0 | 2500 | ||
55-75 | 82-168 | 63-59 | 1480 | 48-66 | 3.5-1.8 | 400 | 2500 | |
15-18.5 | 55-115 | 27-26 | 980 | 48-66 | 1.5-0.8 | 2500 | ||
150PZX | 132-200 | 209-420 | 93-85 | 1480 | 57-78 | 6-2.6 | 500 | 3000 |
37-75 | 139-278 | 40-37 | 980 | 57-78 | 2.7-2.1 | 3000 | ||
90-160 | 187-378 | 78-68 | 1480 | 57-78 | 4.9-2.1 | 450 | 3000 | |
30-45 | 125-252 | 33-30 | 980 | 57-78 | 2.1-1.1 | 3000 | ||
75-110 | 168-336 | 59-55 | 1480 | 57-78 | 3.8-1.7 | 400 | 3000 | |
18.5-30 | 110-230 | 26-24 | 980 | 57-78 | 1.7-0.8 | 3000 | ||
200PZX | 185-315 | 360-720 | 92-86 | 980 | 53-78 | 3.8-2.7 | 740 | 3450 |
90-160 | 272-544 | 52-49 | 740 | 53-78 | 2.2-1.5 | 3450 | ||
160-250 | 328-656 | 80-74 | 980 | 53-78 | 3.3-2.3 | 685 | 3450 | |
75-110 | 252-505 | 46-42 | 740 | 53-78 | 1.9-1.3 | 3450 | ||
110-200 | 305-610 | 67-64 | 980 | 53-78 | 2.8-1.1 | 630 | 3450 | |
55-90 | 233-466 | 38-36 | 740 | 53-78 | 1.6-0.6 | 3450 | ||
250PZX | 355-450 | 600-1000 | 96-92 | 980 | 76-63 | 6.7-2.7 | 740 | 4000 |
160-250 | 475-870 | 55-53 | 740 | 76-63 | 3.8-1.5 | 4000 | ||
280-400 | 560-950 | 81-77 | 980 | 76-63 | 60.-2.4 | 700 | 4000 | |
132-200 | 450-839 | 48-46 | 740 | 76-63 | 3.4-1.4 | 4000 | ||
220-250 | 519-940 | 68-64 | 980 | 76-63 | 5.0-2.0 | 640 | 4000 | |
110-160 | 389-800 | 41-39 | 740 | 76-63 | 2.9-1.1 | 4000 | ||
300PZX | 500-560 | 704-1408 | 95-85 | 980 | 78-63 | 7.3-3.3 | 740 | 4500 |
185-250 | 524-1050 | 54-49 | 740 | 78-63 | 4.2-1.9 | 4500 | ||
355-450 | 648-1296 | 82-74 | 980 | 78-63 | 7.1-3.0 | 700 | 4500 | |
160-200 | 493-985 | 47-44 | 740 | 78-63 | 4.0-1.7 | 4500 | ||
250-355 | 597-1193 | 69-64 | 980 | 78-63 | 5.5-2.5 | 645 | 4500 | |
110-160 | 453-907 | 40-36 | 740 | 78-63 | 3.1-1.4 | 4500 | ||
350PZX | 450-710 | 960-1919 | 95-86 | 980 | 81-68 | 6.9-3.5 | 760 | 5500 |
200-355 | 724-1450 | 54-49 | 740 | 81-68 | 3.9-2.0 | 5500 | ||
355-560 | 888-1775 | 82-73 | 980 | 81-68 | 5.9-3.0 | 703 | 5500 | |
160-280 | 640-1341 | 42-46 | 740 | 81-68 | 3.4-1.7 | 5500 | ||
280-500 | 816-1632 | 69-62 | 980 | 81-68 | 5.0-2.5 | 646 | 5500 | |
132-220 | 616-1232 | 39-35 | 740 | 81-68 | 2.9-1.4 | 5500 |
Product
Diagram
Certificates
Company
Profile
At present our products involve more than a dozen series and more than 100 varleties. The main products are horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts. The compamy has a number of high-quality, high-level and experienced technical and management elites. The material can be adjusted according to the actual working conditions of customers, So as to improve the wear resistance and corrosion resistance of the pump and greatly prolong the service life of the pump. Our products are widely used in beneficiation, metallurgy coal,electric power, petroleum, chemical industry, sand excavation, urban sewage, environmental protection and other industries.
Workshop
Product
Accessories
Application
Product
Transportation
FAQ
1. What Products does Pansto Pump
mainly produce?
Pansot mainly produce
horizontal slurry pumps, vertical slurry pumps, rubber lined
pumps, gravel sand pumps, froth pumps, desulfurization pumps,
filter press feed pumps, dredge pumps, sewage pumps, submersible
slurry pumps and spare parts.
2. Is Pansto direct factory or
trader?
Yes, Pansto is direct Slurry Pump
Manufacturer
with Export and Import License,
having its own foundry workshop, Machining Workshop, Heat
treatment equipment and Assembly workshop, also advanced quality
inspection equipment.
3. Can you provide OEM, ODM service?
Yes.
OEM Service is an important part of our business. Pansto Pump
accept OEM business as samples or drawings of all kinds of pumps
and casting spare parts. And more we offer ODM service
too.
4. What is your warranty period?
We provide one year of unconditional warranty on our products for
the manufacturing defects.
5. What about delivery time?
Normally our production time is within two weeks. Please confirm
before order.
6. The Min
MQQ?
The MQQ is one pcs pump or spare
parts.
Welcome to Contact Us!