Port | yantian |
Packaging | Original Standard carton box packing |
Lead Time | 48hours shipping after get payment |
SmartPRO X8-PLUS Universal Programmer present high-performance on NAND flash and COPLD/FPGA programming, is the most cost effective solution in device programming challenges.
SmartPRO X8-PLUS
Functions and features:
SmartPRO X8-PLUS supports M0 and M3 chips built
by mainstream manufacturers, such as NXP, STM, Freescale,
NUVOTON, FUJITSU and ATMEL. Besides, most M0, M3 chips are burned
through parallel interfaces in X8 programmer, taking about less
than half the time than that through serial connectors.
SmartPRO X8-PLUS supports storages with common
protocol standards. External memory chips are usually needed when
using M0 and M3 chips. Most of these external memory chips are
using SPI, IIC, NOR protocols, etc. These low capacity storages
have full support in X8 programmer.
SmartPRO X8-PLUS
Parameter specifications:
Model | SmartPRO X8-PLUS |
Device Support | EPROM, Paged EPROM, Parallel and serial EEPROM, FPGA Serial PROM, NOR FLASH, BPROM, NVRAM, CPLD, MCU, Firmware HUB, ARM, Standard Logic Devices (TTLCMOS), etc. 1.8 - 9V working voltage. |
Packaging Support | DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, BGA, CSP, SCSP, etc. |
Communication Interface | USB 2.0 (High Speed) |
Offline Mode Storage | No built-in electrical hard disk, a Compact FLASH card |
Optional configuration | Adapter |
Electrical Specification |
Input electricity: AC 100V-240V/47-63Hz Output electricity: 12V/2A |
Product Specification |
Main unit specification: 280mm×170mm×57mm (L×W×H) Weight: 0.5Kg(1.08 Pounds) |
SmartPRO X8-PLUS
Software is user friendly, and free life-time software updates
are available!
Package including:
1pc x SmartPRO X8-PLUS Programmer
1pc x USB Cable
1pc x CD
1pc x User's Manual
1pc x ICP Downloading cable
1pc x AC/DC Adapter