MOQ | 10000 Piece/Pieces |
Port | guangdong foshan |
Packaging | In Cartons by 48*29*19 cm,10000 valves carton |
Lead Time | 5-8 Days |
Brand | WOJIN | |
Model | WJ2302-CPE(no filter) | |
Material | PE | |
Size | Diameter 23mm±0.1 | |
Weight | 0.6g ± 0.03 | |
Color | White | |
Sealing temperature | 163℃ - 168℃ | |
Open pressure | 5-8 mbar | |
Close pressure | ≤2 mbar | |
MEAS | 48*29*19 CM | |
MOQ | 10000 PCS |
One way degassing valve,coffee valve,coffee degassing valve, or degassing valves are a form of MODIFIED ATMOSPHERE PACKAGING (MAP) used in a multitude of industries but are especially popular in the coffee market. The coffee can be packed immediately after the roasting process to keep the aroma and flavor. The one-way degassing valve allows carbon dioxide to escape from the inside of the bag without allowing external oxygen into the sealed bag. The raw materials (HDPE) meets FDA standard, is imported from the USA and have obtained a third-party authority (SGS) FDA test report.
HOW IT WORKS?
When the gas generated by the product sealed in the bag makes the inside of the bag reach to a certain pressure, the gas can be pushed from the inside to the outside to open the one way degassing valve sheet, and the excess gas is discharged outward. When the pressure in the bag reduced to the level which is not enough to open the valve, the valve will close automatically. Meanwhile, the valve will automatically open only when the pressure inside the bag is higher than the pressure outside the bag, otherwise, it will not open, and the air outside will not enter to the bag.
SCOPE OF APPLICATION
HOW TO INSTALL THE VALVE ON THE BAGS
The one-way degassing valve is our core product. The
installation of
degassing
valve will need the pressure valve machine in our company to
hot pressing it on the bag.
1. The valve applicator holds the die head in the correct position underneath the seat for valves.
2. It pressed down the die head by heat sealing the valve to the bag.
3. The pin pokes a tiny (can be 2~6) holes in the bag which the valve covers.
Port :Shunde Foshan Delivery time :5-8 Days
Wojin Plastic Product Factory was established in 2012, we are a professional manufacturer of coffee valve (one way degassing valve) and the semi-automatic valve applicator in China. Our own brand is named as WOJIN. We are in the leading position on the introduction of fully automatic production lines, which allow us to reach a high product qualification rate as 99.9997%. Our goal is to serve the customer with better products and services.
Wojin coffee valve is mainly applying to food packaging including coffee bag and feed fermentation bag. Additionally, we produce semi-automatic hot pressure sealing valve applicator and supply a big variety of packaging bags. The raw material we use HDPE from the USA, while it also meets FDA.
How to Distinguish the Quality of One Way Degassing Valve
1.The easy way to test it is by pumping the air from the bags
with one way degassing valve after sealing, and then see if
the bag will expand or not.
2.Test the freshness of coffee
Making a cup at different times, one month, two months, or
even three months longer time using the valve, write down the
test result and make the comparison, Compare the foam volume
and the acidity of the coffee, if there still is a lot of
foam and the coffee taste less sour, it is said that the
coffee is kept well. Otherwise,,the one way degassing valve
is not good and can't keep the freshness of coffee
effectively.
3. Check the fermented feed
The one way degassing valve placed in the packaging bag aims
to help vent the air that is produced by the feed to keep the
high quality of fermented feed for a longer time. If there is
gas trapped in the packaging bag, or the fermented feed is
moldy, it's no doubt that the one way degassing valve is
inferior.
Unit 3, No.1, West Side of Jielong Street, Jiyue Industrial Zone, Leliu Port, Xinming Village, Leliu Town, Shunde District