Multi Function Folding Inflatable Bathtub

MOQ	10 Units
Port	Budapest
Lead Time	10 days

Contact Now

Product Details

Multi Function Folding IPX4 Medical Inflatable Bathtub 40cmx40cmx63cm

Multi Products Of Function With Innovation Portable Folding Medical Inflatable Bathtub For Adults Bedridden Patient

The Medical Inflatable Bathtub bed could be folded: Owe to the different living environment, people can fold the bed after bath for saving the space as some houses are small.

People can help patients bath on bed directly: Patients can bath on bed with the bathing bed. People don’t have to move the patients.

The capability of Medical Inflatable Bathtub is 50L, which could not only help the people who have to stay in bed for a long time, but also amazingly can let patients soak in hot bath, enjoying that bath in summer and soak in winter.

People should only move the patients to the left and right sides.

To better take care of the patients who are staying in bed, people should only move the patients to the left and right sides, rather than move them back and forth when helping them to bath.

Water Heater of Medical Inflatable Bathtub Specification

Water Heater Parameters
Modle Number
Capacity	25L	Capacity	50L
Size	40cmx40cmx43cm	Size	40cmx40cmx63cm
Cross Weight	15kg	Cross Weight	17kg
Water Pipe Line		100cm
Outlet Line		150cm
Rated Capacity		25L
Rated Voltage		220V
Rated Frequency		50Hz
Rated Power		2000w
Waterproof Level		IPX4
controlmode		Microcomputer

Medical Inflatable Bathtub of Specification

Product Name	Medical Inflatable Bathtub
Capacity	25L/50L
Color	Green, Blue
Size outer diameter	L200W 85H 25cm
Inner diameter	L180W 65H 20cm
Net Weight	5kg
Maximum Load	200kg
Certification	Authoritative CE certification
Inflatable Bathtub Material	Anti-virus, cold-resistant, high-elastic, environmentally friendly PVC that meets the EU EN-71 standard
Notes	The bath bed is used for the first time, after inflating it, let it rest for 2 hours before using

Medical Inflatable Bathtub Instructions:

The First Step: Open the bath bed, roll the bathing person,Put the bath bed under the bather person,Let the bather lie flat inside.

Step Two Step: Use an air pump to fill the bath with air and then fill the outside with air.

The Third Step: After filling the gas, start to test the water temperature and take a bath. It is recommended to wash in 10 minutes.

Step Four Step: After washing, dry the body of the bather,At the same time, dry the bath bed,Put the sheets on the bather person.Give a bath bed withdraw air: first evacuate the gas in the bath bed, and evacuate the outside air. If the deflation is slow, it is recommended to use an air pump to pump air.(Put the inflated nozzle on the bottom of the pump to pump it out)

Step Five Step: After pumping out the air, roll the bather to the bed and take out the bath bed. Fold it up and use it next time. The shower is over.

Medical Medical Inflatab In-package List:

1* bath bed
1* bucket
1* pumping air pump

1* water heater