Micro switch rail high voltage switch PC material shell sterling silver contact

Product Details

Rated voltage: DC24VAC220V
Rated current: 2A
Breaking capacity: DC24V/2A,T=20ms;AC220V/1.5A,Cosφ=0.4
Applicable temperature range:-40℃~+70℃
Duty withstand voltage: 1500V(50Hz)/1min
Mechanical life: 1,000,000 times
Product Overview
S100 series microswitches are limit switches with self-reversing capability. The speed of action is determined by the elasticity of the contacts themselves and does not depend on the external drive speed to determine the opening and closing speeds, making them practical for use in applications such as limiting devices with slow drive speeds and detecting the status of machinery;
Microswitches of the S100 series are equipped with a mechanical forced disconnection operating device. Even in the event of a short circuit, the contacts can be forced open with external operating force even if they are soldered, and for this reason the microswitch creates a safe circuit loop;
S100 series microswitches with self-cleaning contact protection device can effectively protect against dust, moisture and contaminants in the environment, so that the microswitches have high reliability and sensitivity, even at very low contact loads, the reliability is still very high. Very suitable for low voltage and current signals in automation control, interlocking and so on;
S100 series micro switch internal fixed contact piece all use copper plated with pure silver, dynamic contact piece using more flexible phosphor bronze contact point inlaid silver alloy contacts, with small size, reliable control, strong through-current capacity advantages.
environmental conditions
1. Ambient air temperature: -40℃~+70℃;
2. Altitude: not exceeding 5000 meters;
3. Humidity: average relative humidity not exceeding 95% in 24h; average water vapor pressure not exceeding 2.2kPa; average monthly relative humidity not exceeding 90%; average water vapor pressure not exceeding 1.8kPa;
4. The vibration acceleration is not greater than 15m/s²;
5. The surrounding air is not obviously polluted by dust, smoke, corrosive and combustible gases.