Operating pressure | 20~350 Bar | Lubricants | Oil 46 - NLGI-2# |
Operating temperature | -40 °C to 200 °C | Discharge (for outlet) | 0.2ml/cyc |
Inlet port | G1/8 | Outlet port | M10x1 |
Outlets | 6 - 22 | Piston cycles | Max 200 cyc/min |
Material | Nickel-plated steel |
The DSP is a single block progressive divider valve that is ideal for applications where space is limited.
It is available in 6,8,10,12,18,20 and 22 outlet versions, each with an output of 0.2 cm³ inch per cycle.
The single output of the dosing device may be combined with the one located adjacent by eliminating the special fitting and applying a plug.An outlet can also be merged with the sequential outlet on the block by removing the special outlet fitting and installing a plug.
Visual or electronic monitoring can be achieved simply by removing a plug and installing a visual or electronic add-on device as shown below. The spools in a progressive metering valve operate sequentially partitioning equally across the outlets, the grease being pumped into the metering block inlet.
The grease pumped inside of the block is distributed by the piston dispensers of the progressive dosing device equally among the different outputs. In case a single output becomes blocked, the pistons stop their activity allowing for the control of the entire system by means of a single device for this purpose.