Low pressure metal PVC hose, Used for furnace kitchen coalgas And gas hose

Low pressure metal PVC hose, Used for furnace kitchen coalgas And gas hose

Installation Notes:
Use procedure: check appearance-installation connection-seal inspection-ventilation use
(1) Insert the safety gas hose connector into the wave joint of the cooker, water heater or valve you use, insert the depth of 16-18mm, and then use a screwdriver to tighten the steel buckle adjustment bolt of the joint to make the hose joint and the connected cooker etc. The gas appliance is tightly sealed, and then insert the other end of the safety gas hose into the gas source valve connector to a depth of 16-18mm. Also tighten the steel buckle adjustment bolt with a screwdriver;
(2) Close the air source before installation;
(3) First check the hose for any accidental damage during transportation;
(4) After installation, open the air source valve and use a small amount of soapy water or a special leak detector to check whether there is a leak at the joints. If necessary, continue to tighten the adjustment steel buckle bolts until no air leakage;
(5) The gas source valve must be closed after each use, and the hose installed in the concealed place should be regularly checked for leaks and tube expansion;
(6) After you move and disassemble the gas appliance, you must check whether the hoses, steel buckles, joints, etc. are damaged or missing;
(7) It shall not be forced to bend 90 ° within 55mm below the safety gas hose joint.
(8) It shall not be used in gas sources containing dimethyl ether.

Q1: Are you a trading company or a manufacturer?
A1: We are manufacturers.

Q2: Do you have your own R & D team?
A2: Yes, we can customize products according to your requirements.

Question 3: Do you provide samples?
A3: Yes, we provide samples, but we need you to pay for shipping

Question 4: What is the quality?
A: We have the best professional engineers and strict quality assurance and quality control systems.

Q5: Can we become your distributor?
A5: We are looking for distributors and agents around the world.

Q6: How about the bag?
A6: Usually it is a carton, but we can also pack it according to your requirements.

Q7: How about the delivery time?
A7: It depends on the quantity you need, usually 1-25 days.