After-sales Service Provided | Free spare parts | Warranty | 1 YEAR |
Application | OUTDOOR, HOTEL, Commercial, HOUSEHOLD, Hot Tubs | Power Source | Electric |
Type | Water Source Heat Pump | Installation | Wall Mounted |
Storage / Tankless | pool heater | Housing Material | STAINLESS STEEL, Stainless steel |
Use | Swimming Pool Heater, Swimming Pool Heater | Certification | ce |
Place of Origin | Guangdong, China | Brand Name | COASTS, COASTS |
Model Number | ST-15 | Product name | Swimming Pool Heater |
Function | Wet Steam | Power | 15KW |
Voltage | 220V/50Hz | Phase Paramet | Single Phase |
Packing | Carton+foam |
Any
Question Please Contact Us In Following
Table.
We Are
Looking Forward To Your Inquiry. Thank You Very
Much.......
1.What factors should be considered to determine the steam generator
Firstly, we should consider the size of the steam room , space is bigger, the power of steam generator is bigger, besides, the material of steam room is also a factor need to be considered when decide steam generator on the base of same space. Meanwhile, the power requirements from small to large for different kind material steam room are acrylic, glass, tile, stone. in the same space What specific wall material, how much space should be equipped with how many kilowatt steam generator, please contact the manufacturers and consulting sales.
2. where is steam generator
should installed?
For the old residential steam bath room
can achieve this function by modify bath tub or shower panel.
as long as the room is completely sealed. Water proof and no
leakage for steam. opening 3 / 8 "gap for cold air to enter
the shower room on the earth of door. In addition that
should also consider following factors: A: steam
generator power. B. power supply voltage must be 208V or
240V. C. space for placing machine D. material choice of
steam room, please consult the supplier.
3. Where the controller should be
installed.
Controller should be installed in the
steam room area, convenient to operate from the high 5 to 6
scale, its location as far as possible away from the steam
head.
4. The location of the steam head
should be installed
Steam head should be higher than the
ground or tub bottom 12 "from any corner 6" far, the nozzle
should be as far away as possible from specific bathing place
(standing or sitting).
5. If the water is very hard, what can be done to protect the steam generator?
If you live in hard water areas there are two ways to choose:
A. install the water softening device in your house's hot water supply pipe., the cold water enter into steam generator through this pine which was treated. This device is also good for your piping systems, decorative hardware, faucets, glass all.
B. automatic drain steam generator is good choice.
6. What kind of daily maintenance need for steam generator.
No. It requires little maintenance, our guarantee of family use is that 5 years for parts and 2 years for whole set
7. cold or hot water be
requested for steam
generator?
cold water.