JMC 36V Stepper Motor with Integrated Controller CANBUS 3 N.m 2-phase 4.2A

Quick Details (View All)

Place of Origin	Guangdong, China	Brand Name	JMC
Model Number	IHSS60-36-30-31- RC	Phase	two phase, two phase
Type	Hybrid	Current / Phase	4.2A
Certification	ce	Voltage	24-50VDC
Current	4.5A	Maximum Frequency	200Khz
Encoder	1000CPR	Frame Size	60mm
Power supply	36VDC	Holding torque	3N.M
Nema	24	Name	JMC 36v Stepper Motor with Integrated Controller 3 N.m CANBUS

Product Details

JMC 36V Stepper Motor with Integrated Controller CANBUS 3 N.m 2-phase 4.2A

IHSS60-36-30-31-RC

Product Description

Introduction:

The IHSS60-36-30-31-RC is a new Modbus-RTU, CANopen bus-integrated stepper motor that integrates RS-485 and CAN bus communication control technology. The stepping motor driver using standard Modbus-RTU bus protocol and CANopen bus communication protocol and DS402 control algorithm, compared with the traditional combination of stepper motor drive and stepper motor with lower cost and more convenient installation, but also can effectively avoid the problem of stepping motor lose step, and effectively restrain the motor temperature rise significantly to reduce the vibration of the motor, greatly enhance the performance of high speed motor. This integrated stepper motor integrates bus communication control technology, simple wiring, no losing step, lower heat, high speed, high torque, low cost and convenient maintenance. It is a cost-effective motion control product.

Specification:

Current/Phase: A	5.0	Position accuracy	1.8±0.09
DC Resistance: ±10%	0.43	Number of Phase	2
Inductance/phase: mH±20%	2	Temp Rise(max)	80℃
Holding Torque: N.m	3.0	Dielectric Strength	500VDC
Inertia: g.cm2	690	Insulation Resistance	400MOhm(500VDC)
Step Angle	1.8	Radial Play	Max 0.025mm(Load 450g)
Weight	1.6Kg	Axial Play	Max 0.075mm(Load 920g)

Features:

1. No lost step, accurate positioning

2. Support standard RS-485 bus and CAN bus

3. Support standard Modbus-RTU protocol and CANopen protocol

4. Three control modes with position mode, velocity mode and homing

mode

5. Built-in CW, CCW, SW IO input signal with 5V or 24V for the limit and homing reference

6. A BREAK brake signal output signal

7. RJ45 standard network connection from the slave through the twisted pair cable can be connected

8. The transmission frequency is most supported by 1Mbps, and the transmission distance is the farthest up to 1KM

9. 100% rated torque drive motor

10. Variable current control technology, high current efficiency

11. Small vibration and smooth running at low speed

12. Built-in acceleration and deceleration control to improve start and stop smoothness

13. Users can define their own subdivisions

14. Compatible 1000 - wire and 2500 - wire encoders

15. General application parameters do not need to be adjusted

16. Loss phase protection, over current protection, over voltage protection and over position error protection

Specifications

Input Voltage		24~50VDC(36V Typical)
Output Current		4.5A 20KHz PWM
Pulse Frequency max		200K
Communication rate		57.6Kbps
Protection		l Over current peak value 8A±10% l Over voltage value 80V l The over position error range can be set through the HISU
Environment Specifications	Environment	Avoid dust, oil fog and corrosive gases
	Operating Temperature	70℃ MAX
	Storage Temperature	-20℃~+65℃
	Humidity	40~90%RH
	Cooling method	Natural cooling or forced air cooling

Installation Dimensions

FAQ

Q1. What are your products can be use to ?

A: Our products can be use in CNC routers ,CNC milling machine ,engraving machine, packaging machine,filling machine, cutting machine, printing machine,laser machine, carving machine, labeling machine and so on.

Q2. What kind of Payment methods do you accept ?

A: We can accept Paypal ,Western Union ,TT

Q3: What kind of shipping methods do you use ?

A:1)For samples or small batch , air shipping is recommended . (DHL,Fedex,TNT UPS ,EMS or Aramex) ,We will provide the tracking No. Once we get it after we ship out the products.

2)For mass production or big batch, ocean shipping/sea shipment is recommended .

Q4: What is the lead time of my products?

A: Lead time : For standard samples , 2-5 days will be OK .

For mass production , the lead time depend on the quantities you need .

Note:

Sometimes your local customs may charge tax from you. then you should pay it to get the package, sometimes not have.The exact delivery time is delayed on the post office and customs, we can't control it. If the product is delayed, pls pay more patience to wait and ask us to extend delivery dates for you.