JCID Q1 iPhone Battery Health Quick Repair Board No FPC Required

Product Details

JC-ID Q1 iPhone 11-15 Pro Max 电池健康快速修复板 - JCID Q1 编程器修改 iPhone 电池健康数据/周期并删除 iPhone 重要电池消息，无需电池 FPC。

JC-ID 11-15PM 电池健康快修板-Q1 功能：
1. JC-ID Q1 电池健康快修板，带 OLED 显示屏，无需电池 FPC 线即可修改设置的电池健康数据和循环次数，适用于 iPhone 11- 15 专业最大。
2.无需电池FPC，快速修改设置的电池健康值和循环次数。
3.支持单次模式和批量模式。
- 单次模式： 实时读取电池数据。修改数据后，按确认键，然后开机两次即可在设置界面完成电池数据修改。
- 批处理模式： 保留预先设置的参数。只需连接电池并开机两次即可
在设置界面完成电池数据修改。

使用说明：
方法一：使用官方配备的电池FPC。
1：将电池（连同原电池板）扣到电池座上。
2：将USB电源线的另一端（或使用JCID FPC）扣到iPhone主板上。
3：修改iPhone电池数据并确认。
4：打开iPhone（请使用iPhone的尾塞充电和开机）。 iPhone首次开机后，手机上没有电池数据。出现电池弹窗后，第二次启动iPhone，修改后的数据即可正常显示。
5：取出电池并将其放回iPhone。

方法二：兼容市面上带数据针的电源线。

使用iPhone电池修复FPC排线和快修板的区别：
使用快修板锁定电池数据。
1. 计算机读取的电池健康状况和循环时间无法修改。仅显示原始电池数据。
2、新电芯容量无法充分释放，电池寿命短期内无法提高。

使用电池修复 FPC 修改电池数据。
1. 计算机读取的健康度和循环时间可以修改为用户之前修改的数据。
2.新iPhone电池的容量可以充分释放，更换电池后iPhone的电池寿命将立即得到改善。

总之，这两种方法的效果是有区别的，用户可以根据自己的需要选择适合自己的方法。

请注意：iOS17.4系列上的iPhone电池健康数据无法通过电池设备修改。

特征：
1.支持离线操作，无需连接电脑。
2. 无需焊接电池座，即可使用。
3.布局合理，无干扰连接，更稳定。
4、平放操作，不会因电池放置不良而造成极点接触。
5、除了标配电池FPC外，还兼容市面上常见的电源线。
6.支持rmeve升级。
7.多按钮设计。
8. 附带模块操作指南。
9、装置完整、独立。

。。。。。。。。。。

。。。。。。。。。。

JC-ID Q1 iPhone 11-15 Pro Max Battery Health Quick Repair Board - JCID Q1 programmer modifies iPhone battery health data/cycles and deletes important iPhone battery messages without battery FPC. JC-ID 11-15PM Battery Health Quick Repair Board-Q1 Functions: 1. JC-ID Q1 Battery Health Quick Repair Board, with OLED display, can modify the set battery health data and cycle times without the battery FPC line, suitable for iPhone 11- 15 Pro Max. 2. No need for battery FPC, quickly modify the set battery health value and cycle number. 3.Support single mode and batch mode. - Single mode: read battery data in real time. After modifying the data, press the confirm button and then turn on the phone twice to complete the battery data modification in the setting interface. - Batch mode: Preserve preset parameters. Just connect the battery and turn on the phone twice to complete the battery data modification in the settings interface. Instructions for use: Method 1: Use the officially equipped battery FPC. 1: Buckle the battery (together with the original battery board) onto the battery holder. 2: Connect the other end of the USB power cable (or use JCID FPC) to the iPhone motherboard. 3: Modify iPhone battery data and confirm. 4: Turn on the iPhone (please use the tail plug of the iPhone to charge and turn it on). After the iPhone is turned on for the first time, there is no battery data on the phone. After the battery pop-up window appears, start the iPhone for the second time and the modified data will be displayed normally. 5: Remove the battery and put it back into your iPhone. Method 2: Compatible with power cords with data pins on the market. The difference between using the iPhone battery to repair the FPC cable and the quick repair board: Use the quick repair board to lock the battery data. 1. The battery health status and cycle time read by the computer cannot be modified. Only raw battery data is shown. 2. The capacity of the new battery cells cannot be fully released, and the battery life cannot be improved in the short term. Use battery repair FPC to modify battery data. 1. The health and cycle time read by the computer can be modified to the data previously modified by the user. 2. The capacity of the new iPhone battery can be fully released, and the battery life of the iPhone will be improved immediately after replacing the battery. In short, the effects of these two methods are different, and users can choose the method that suits them according to their own needs. Please note: iPhone battery health data on the iOS17.4 series cannot be modified through the battery device. Features: 1. Supports offline operation, no need to connect to a computer. 2. No need to weld the battery holder before it can be used. 3. Reasonable layout, interference-free connection, more stable. 4. When placed flat, there will be no pole contact caused by poor battery placement. 5. In addition to the standard battery FPC, it is also compatible with common power cords on the market. 6. Support rmeve upgrade. 7.Multi-button design. 8. Comes with module operation guide. 9. The device is complete and independent.