Intellectualization HG-SR202BJ Motor For Semiconductor Manufacturing Equipm

Product Details

Motor series: low inertia, medium power. Rated output power: 30.0kw. Rated
speed: 1500r / min with brake or not: No. Shaft end: Standard (straight shaft).
Voltage: 400V type.
Protection level: IP65 (p67) hg-sr202bj basic knowledge.
Features: low inertia, from low speed to high speed, three modes can be
selected, suitable for different application ranges. As a standard production
port, hg-sr202bj is installed with 30kW or higher dry flange and feet
Application examples: basic knowledge of injection molding machine,
semiconductor manufacturing installation, large transmission machinery hg-
sr202bj. High resolution encoder 131072p / rev (17 bits).
High resolution encoder is included to ensure excellent performance and
stability at low speed.
All motors are the same size as the previous products and the wiring is
compatible. Motor series: low inertia, low power. Rated output power: 0.75KW.
Rated speed: 3000r / min. with brake or not: attached.
Shaft end: keyway (slotted position).
Protection level: IP55, excluding the shaft threading part and the basic
knowledge of connector hg-sr202bj. Features: low inertia, suitable for high
frequency operation.
Application examples: inserter, assembly machinery. Motor series: medium
inertia, medium capacity. Use serial pair / incremental encoder. Rated output
power: 3.0kw. Rated speed: 1000rpm. With or without band brake: No. Shaft end:
straight shaft.
The stator structure of AC servo motor is basically similar to that of
capacitor split phase single-phase asynchronous motor hg-sr202bj (type
selection data). The stator is equipped with two windings whose positions are
90 ° different from each other. One is the excitation winding RF, which is
always connected to the AC voltage UF, and the other is the control winding L,
which is connected to the control signal voltage UC.
Therefore, AC servo motor is also called two servo motors. Motor series: medium
inertia, medium power. Rated output power: 3.5kw rated speed: 2000r / min.
With brake or not: hg-sr202bj (model selection data) is attached. Shaft end:
Standard (straight shaft). Protection level: IP65 (IP67).
Features: there are three modes of medium inertia from low speed to high speed,
which are suitable for different application ranges. Application examples:
transmission machinery, robot, X-Y worktable.
High resolution encoder 131072p / rev (17 bit) hg-sr202bj (selection data).
High resolution encoder is included to ensure excellent performance and
stability at low speed.
All motors are the same size as the previous products and the wiring is
compatible. Motor series: low inertia, medium power. Rated output power: 6.0kw.
Rated speed: 1000r / min. with brake or not: attached. Shaft end: Standard
(straight shaft). Protection level: IP65 (IP67)
Features: low inertia, from low speed to high speed, three modes can be
selected, suitable for different application ranges hg-sr202bj selection
manual. As a standard production port, 30kW or higher power is suitable for dry
process blue plate (type) installation and foot installation. Basic knowledge
of hg-sr202bj. Application examples: injection molding machine, semiconductor
manufacturing device, large conveying machinery. High resolution encoder
131072p / rev (17 bits).
High resolution encoder is included to ensure excellent performance and
stability at low speed. All motors are the same size as the previous products
and the wiring is compatible.