innoCon 6800P controller is specially designed for water treatment and industrial process control. Used with
innoSens pH/Redox sensor, it can measure the pH, Redox and temperature of the sample water. It features
automatic temperature compensation and has various mounting methods. 4-20mA/RS485 and multiple control
function outputs are a standard feature.
Features
Technical data
Measuring parameter
pH -2.00 - 16.00 pH
ORP -2000 - 2000 mV
Temperature 0 - 130 ℃
Input
Measuring sensor nnoSens pH/ORP sensor
Temperature probe Pt-1000 / NTC-10K (optional)
Output
Analog Output 1 4-20 mA isolated current output for pH/ORP, it can be made to represent
any segment of the measuring scale
Analog Output 2 4-20 mA isolated current output for TEMP., it can be made to represent any
segment of the measuring scale
Relay 1&2 (Alarm) Operation: ON/OFF
selectable action : High / Low
Set Point: High/10.00 pH; Low/4.00 pH (adjustable)
Hysteresis: 0.01 pH (adjustable)
Relay contacts: 5A/250VAC;5A/30VDC
Relay 3 (Washing Relay) Wash interval: 0.1~1000hour
Wash time: 1~1000s
Relay contacts: 5A/250VAC;5A/30VDC
Interface RS 485 Modbus RTU
Baud rate: 9600 bps
Data format: 8 bit
General Information
Power supply 90 - 260V AC, 50/60Hz; 24VDC(Optional)
Temperature Operating temperature: 0 - 60 ℃
Storage temperature: -20 - 70 ℃
Humidity Max. 90% rH at 40℃ (non-condensing)
LCD Screen Big-size screen of crystal display, white back ligh
Language Chinese / English
Passcode Set mode: 0022, Calibration mode: 0011
Protection grade IP65
Dimensions 144 * 144 * 110mm
Installation Wall/Pipe/Panel Mounting
Panel Cut Size 138 * 138mm
Weight 0.85Kg