Infusion sets

Product Details

Product name

infusion set

Type

Conventional

Specification

120cm, 130cm, 150cm

Composition

Spike, drip chamber(1ml=20 drops), follow regulator,air vent,pvc tube,injection bulb,needle

Packaging

Independent packaging, PE bag

Usage

1. Open the small package along the opened seal, remove the infusion set, close the regulator, remove the puncture protective

cover, and insert the cork into the container stopper vertically; 2. Open the regulator, empty the gas in the pipeline, close the

regulator, and then perform intravenous injection; 3. After dropping the plastic, turn on the regulator to adjust the infusion

volume.

Advantages

1. You can choose a flexible infusion set, the pipeline of the infusion set is not easy to be damaged or branded in a place with

extremely low temperature; 2. The drip bucket is made of high-quality raw materials, with good transparency and easy to observe

the dripping speed; 3. selected stainless steel materials, polished needles, smooth edges without burrs, exquisite double bevel

design, reduce patient discomfort, small tissue wounds, and easy to heal.

Storage condition

Infusion sets should store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilate good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.

Note

1. This product can only be used for gravity infusion; 2. During use, check whether the packaging bag is complete, such as whether the packaging is damaged, whether the accessories have fallen off, and whether there are foreign objects in the packaging bag; 3.This product is for one-time use and destroyed after use.